Specifications

33
Method Pane Graph Pane
These various windows can be customized for the users preference by turning them on or off in
the View Menu.
3. To Connect Instrument
(Skip to Step 7 if you are just showing the features of the software) The current version of
the UVProbe Software will control the UV-1601, UV-1700, UV-2401, UV-2501, UV-2101,
and the UV-3101.
A. Select [Window] > Spectrum to open the Spectrum module. A module must be active
before the spectrophotometer can be connected.
B. Go to [Commands] from the [Instrument] pull down menu.
C. Select [Connect]. A dialog box will appear showing the progress of the connection.
4. Setting Measurement Parameters
Select Edit > Method, or click the Method icon to display the Spectrum Method dialog
box. The Method parameters are arranged in a tab format. The measurement tab allows
you to set up the parameters for your scan. If you are going to run a sample, input the
Start and End wavelength values. The exact Scan Speed is dependent on the other
instrument parameters set. See the Appendix A for a listing of sample scan speeds. The
Sample Preparation tab can be used to record information about the sample, but does not
affect the measurement.