Specifications

35
5. Data Collection
Click [Baseline] on the Photometer Button bar at the bottom of the screen and click [Ok] in the
Baseline Parameters dialog box. Remember, Baseline corrects over the entire selected
wavelength range. The Autozero function corrects at one wavelength.
Perform a spectral scan by inserting the sample into the spectrophotometer. Click the [Start]
button. After the scan, enter a file name in the New Data Set dialog box and click [Ok].
6. Data Saving
The data saving structure for UV Probe is flexible. Indepth instructions are available in
Appendix B. For a simple way to save the acquired data, Select File > [Save As] and select the
appropriate data directory in the [Save In] box at the top of the dialog box. Enter the correct file
name, select .spc in the [Save As Type] list, and click [Save].
7. Data Display
If data has not been collected, open sample data. The suggested file is Rosebengal.spc. If you
have only collected one spectra, you may want to open other demo data to show all the
functionality of the software. The Graph pane on the right of the screen has 3 tabs. The Active
tab shows one single spectrum. This is the data that will be manipulated.