Specifications

 Click on the image near the border between the drop and

the background and the Focusing window will open.

 To adjust the focus of the image turn the camera lens focus

adjustment until the image is focused.

 Click Adjust Camera Setting to get appropriate intensity

(green on Focusing window).

 Approach the sample stage to touch the drop.

 Click Record and wait for the images to be recorded and then press Done.

4. Curve Fitting

 Select To End from the Fitting Options box, make sure that Use AutoBaseline is

selected and press Execute.

 Check this visually, and if unsatisfied unselect Use AutoBaseline and set it manually by

clicking and dragging on the white circle and the toggles available. Place the blue box

around the entire drop profile similarly, return to the first acceptable image and press

Execute again. Press Close to continue to data analysis.