Door control and security hardware
Introduction Since pioneering the first exit device in 1908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility for schools, hospitals, stadiums and public buildings. From innovative exit devices to electronic access control solutions and accessories, Von Duprin never compromises when lives are at stake. Von Duprin exit devices meet or exceed domestic and international quality standards. All devices are UL listed for panic or fire hardware and are ANSI certified.
Table of contents Electric strikes 4200 Series electric strikes 4-5 5100 Series electric strikes 6-7 6000 Series electric strikes 8 6100 Series electric strikes 9-11 6200 Series electric strikes 12-16 6300 Series electric strikes 17-18 Electric strike / Lock information 19 E996L Electrified Breakaway lever trim 20 Lever styles 21 EL/QEL Electric latch retraction 22 RX/LX Switches 23 SS Signal switch 24 RX330/RX350 Push pad 25 Chexit delayed exit 26-27 DE 5101 28 ALK Exit alarm
200 Series electric strikes for cylindrical locks Overview The 4200 Series electric strikes are easy to order, configure in the field and install. This makes it a great choice for commercial applications where traffic control is the primary function. Compatible with a wide range of cylindrical devices, the 4200 series makes electrifying an opening simple. It is designed and tested to work will all Schlage and Falcon cylindrical locks as well those of many other manufacturers’.
4200 Series electric strikes dimensions Ordering information Brown Brown-White 24 VDC strike wiring Buzzer* Orange-White Rectifier kit* 12 VDC input nonpolarized Model 4200 - S024 - EB Orange 1 2 3 * Optional Selections correspond with the numbers above Orange 24 VDC input nonpolarized Orange-White Brown Brown-White Latchbolt monitoring switch (4212 only) 1 Model 4211 4212 See model specification chart to make the proper selection See model specification chart to make the proper select
5100 Series electric strikes for cylindrical locksets Overview The Von Duprin 5100 electric strike has been designed and manufactured to meet the needs of locksmiths and security professionals. This easy-to-install electric strike was created for medium-duty applications, specifically to control traffic flow through interior and exterior openings in retail and commercial environments. 5100 Series electric strikes for cylindrical locksets The 5100 electric strike is designed for maximum flexibility.
5100 Series electric strikes dimensions 5/32" radius on 4 corners 5/32" radius on 4 rners co (Aluminum frame) 3-23/32" 3-31/32" 2-7/16" 7-7/16" 7-15/16" 2-1/16" 4-7/8" 4-1/8" 1-1/16" 1-1/2" 1" 1-11/16" 1-11/16" CL strike 3-3/8" 31/32" 1-1/4" 31/32" 5/8" CL Lock and strike 23/32" CL Lock and strike Ordering information Model 12 VAC input 5100-S024 12 VDC output Yellow for 12V Red for 24 V White 1 White Rectifier kit* Solenoid power requirements; 12VDC, 0.38 A, 24 VDC, 0.
6000 Series electric strikes Overview Von Suprin 6000 Series electric strikes Von Duprin is the leading manufacturer of premium, heavy-duty electric strikes known for their reliability, durability and security. Electric Strikes provide remote release of a locked door. They allow the door to be opened without retracting the latchbolt. This occurs by the releasing of the electric strike lip (sometimes called keeper or gate).
6100 Series strikes for rim exit devices Overview Von Duprin electric strikes are known for their reliability, durability and security. The 6100 Series is designed to withstand abuse. Its heavy-duty stainless steel construction is fully UL1034 and UL10C Listed and ANSI/BHMA Grade 1, 1500 lb hold force rated. 6100 Series electric strikes are designed for use with a variety of rim exit devices. They interface with the latch mechanism of the exit device.
6100 Series strikes dimensions Wiring AC 6100 Series specifications 12V 24V Resistance in Ohms±10% @ 70°F 21 82 Watt-seated @ 70°F 7.5 8 Amps-seated @ 70°F 0.6 0.33 Amps-inrush @ 70°F 0.6 0.
6100 Series how to order Ordering information Voltage 3 4 5 Buzzer* Dual switch* 2 Finish Power failure mode 1 Rectifier kit* Model 6112 - FSE - DS - 24 - S024 - US3 - EB 6 7 * Optional Selections correspond with the numbers above 1 6111 3 DS DS-LC 4 24 12 Dual switch (optional) Monitors latch bolt and lock status. DS switches rated at 24 VDC 50 milliampere - 2 amps. Optional for computer monitoring. Monitors latch bolt & lock status. DS switches rated 24 VDC 50 milliampere or less.
6200 Series strikes for mortise or cylindrical devices Overview Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series is designed to withstand abuse. Its heavy-duty stainless steel construction is fully UL1034 and UL10C Listed and ANSI/BHMA Grade 1, 1500 lb hold force rated.
6200 Series strikes for mortise or cylindrical devices Wiring AC AC with buzzer DC DC with buzzer Model Specifications Model # 6210 6211 6211AL 6211WF 6212 Retrofits model n/a VD 3140, FA 712 FA 722 FA 732 VD 3146 Latchbolt throw 3 3 3 Face plate length 4 7/8" 4 7/8" 4 7/8" /4" Backbox depth Lockset # Doors Door & frame type Options /4" /4" 3 3 4 7/8" 6 3/8" 1 21/32" 1 21/32" 4 1/2" 1 21/32" Wood • --• --• • --- • • • --• • --- • • • ----• --- • • • ------• • • • -
6200 Series strikes for mortise or cylindrical devices Model Specifications Model # 6212WF 6213 6214 6215 6216 6221 Retrofits model n/a VD 3041, 3042, 3061, 3062 FA 310-2 3/4 FA 310-2 FA 310-3-1 VD 3071 & 3072 Latchbolt throw 3 3 Face plate length 6 3/8" • 6" 9" 4 3/4" 2 1/2" 1 5/8" • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Backbox depth 6200 Series strikes for mortise or cylindrical devices Lockset # Doors Door & frame type Mortise C
6200 Series strikes dimensions Dimensions 6212 6210 1 1/4" (32mm) 7/8" (22mm) 1/2" (13mm) 6215 1 15/32" (37mm) 1 3/8" (35mm) 1 11/16" (43mm) 1 3/4" (44mm) 4 7/8" (124mm) 1 3/8" (35mm) 1 1/4" (32mm) 1 9/16" (38mm) (41mm) 3 3/8" (86mm) 3 1/4" (83mm) 12" (305mm) 1/8" (3mm) 3 3/8" (86mm) 6 3/8" (162mm) 12" (305mm) Minimum Clearance 2 1/16" (52mm) 6212WF 1 1/4" (32mm) 1/2" (13mm) 12" (305mm) Minimum Clearance 1/8" (3mm) 3 9/16" (90mm) 2 1/16" (52mm) 7/8" (22mm) 1/2" (13mm) 6211AL 1 1
6200 Series strikes dimensions Dimensions 6224AL 6223 1 1/4" (32mm) 4 1/2" (114mm) 1 3/8" (35mm) 9" (229mm) 3 7/8"(98mm) 3 7/8" (98mm) 6" (152mm) 6126 1 3/8" (35mm) 1 5/8" (41mm) Minimum Clearance 1 3/4" (44mm) 1/4" (6mm) 9" (229mm) 1 5/8" (41mm) 1 1/2" (38mm) 1 5/8" (41mm) 3 3/4" (95mm) 1" (25mm) 11/16" (17mm) 12"(305mm) Minimum Clearance 5/32" (4mm) 6225 2" (51mm) 1 3/8" (35mm) 1 1/2"(38mm) 2 1/16"(22mm) 1 5/8" (41mm) 9" (229mm) 3 3/4" (95mm) 1" (25mm) 1 5/8" (41mm) 12"(305mm)
6300 Series surface mounted strike for rim exit devices Overview Von Duprin electric strikes are known for their reliability, durability and security. The 6300 Series is designed to withstand abuse. Its heavy-duty stainless steel construction is fully UL1034 and UL10C Listed. 6300 Series electric strikes are designed for use with a variety of rim devices. It interfaces with the latch mechanism of the exit device. The movable lip (keeper) allows a door to open even when the latch bolt is extended.
6300 Series dimensions 1-3/4" 3/4" AC (19.0mm) (44.5mm) HORIZONTAL ADJUSTMENT MOUNTING HOLES 9" 8-1/4" (228.6mm) 5-1/2" (209.6mm) 1-5/8" (139.7mm) (42.0mm) AC with buzzer LOCK DOWN HOLES DC = Direct current Continuous duty = Energized 1 min. or more Note: W hen using device not listed or when retrofitting a strike to an existing application, please contact Von Duprin Technical Support for application assistance.
Electric Strike/Lock information Finishes US number BHMA number Description US3 — Plated polished brass on stainless steel US4 — Plated dull brass on stainless steel 84 US10 639 Plated dull bronze on stainless steel 06 US10B 640 Wire size selection Von Duprin number Current requirement at 24VDC 85 Plated dark bronze on 86 stainless steel US32 629 Stainless steel, polished 31 US32D 630 Stainless steel, satin 32 Length of wire run (in feet) 0-.5 Amp .
E996L Electrified Breakaway™ lever trim E996L Electrified Breakaway lever trim provides remote locking and unlocking capabilities while incorporating the patented Breakaway trim design. The 24VDC solenoid can be energized from a distant controller, thus allowing access control of the opening. The control of stairwells in high-rise buildings is a common application for this trim. When electrically unlocked the unit operates as a normal lever trim.
Lever styles Decorative Levers M51 Knurling available M52 Knurling available M53 M54 M55 M56 M57 •• M61 (Handed) M62 •• (Handed) M63 (Handed) M81 Knurling available M82 M83 M84 M85 (Handed) •• Available in Stainless Steel substrate ONLY. Lever styles Standard Levers 01 02 Knurling available 03* Knurling available 05 06* Default lever Knurling available 07 12 (Handed) 16 (Omega) 17* Knurling available 18 ACC (Accent) (Handed) AST (Asti) (Handed) MER (Merano) (Handed) STA (St.
EL/QEL Electric latch retraction QEL Quiet electric latch retraction EL Electric latch retraction The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
RX/LX Switches LX33A/LX35A RX33A/RX35A LX98/LX99 RX98/RX99 Rim device shown — Refer to 33A/35A or 98/99 series catalog for complete product information, mounting styles, outside trim, finishes, etc. RX Request to exit The RX (2xit) feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the pushpad.
SS Signal switch Monitors pushpad and latch bolt The SS feature is used to signal the unauthorized use of an opening. This device is equipped with two internal SPDT switches. One switch monitors both the pushpad and the latch bolt assembly, making the latch bolt tamper resistant, for positive security. An additional SPDT switch is connected to the 1 1/4" (32mm) mortise cylinder with straight cam for alarm “bypass.” (Schlage cam reference B502-191).
RX330/RX350 Push pad RX330 RX330 and RX350 bar features an active push pad with monitoring switch or “request to exit” switch, used to inhibit alarms for authorized exiting. The 330 grooved outer case and the 350 smooth outer case are designed as companion units for series 33A, 35A, 98 and 99 exit devices. Minimum door openings: The RX switch option is also available on 55DU and 88DU crossbars, and are designed as companion units for series 55 and 88 exit devices. 1.
CX The Chexit® Door position input: An external door position switch can be connected to the Chexit. Using the door position input ensures that the door is in the closed and latched position before the device rearms. Designed for use on delayed exit applications, the Chexit system is ideal for controlled areas. All controls, auxiliary locking, local alarm, and remote signalling are self-contained in the Chexit, providing safe, secure, easy to install and simple to operate door control and exit hardware.
CX The Chexit® To order, specify: 1. Prefix product description number “CX”. Example: CX99L 2. D oor size other than 3' (914mm). 3. Door thickness other than 1 3/4" (45mm). 4. Finish. 5. H anding, LHR or RHR. Required with “CD” option. Options RCM Remote Chexit Module — is designed to provide the concept of the Chexit delayed exit system for door sizes smaller than the standard Chexit device can accommodate. The Chexit module is installed in a control box and mounted in a remote location.
Alarmed exit devices The DE5101, like the Chexit system, is used on delayed exit application and is ideal for controlled areas. This concept in delayed exit systems combines life safety with the needs of security and meets all requirements of NFPA 101 for “Special Locking Arrangement.” The DE5101 is commonly used on narrow stile doors where a standard or narrow stile Chexit is not practical.
ALK Alarm kit ALK Alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key thus allowing the exit device to be set in an armed or disarmed mode. The horn is rated at 85 decibels.
GUARD-X Exit alarm lock 2670 GUARD-X provides secure, alarmed code-compliant protection for secondary emergency exits. The GUARD-X exit alarm lock readily identifies the door on which it is mounted as an emergency exit and secures the opening against unauthorized use. It is ideal for deterring theft in restaurants and retail establishments such as: discount stores, grocery stores, drug stores, clothing stores and sporting goods stores.
E7500 Electric mortise lock Allegion Connect The electric mortise lock device has all the versatility and advantages of the standard mortise lock device, plus the advantage of being electrically controlled by a remote switching device, an access control system or an automatic fire alarm system. The device features the E7500 mortise lock. The E7500 controls the locking of the outside trim.
Electrical options Power Supplies Series PS902/914 PS902 PS904 PS906 PS914 Number of connectors on power supply for the following: 2 amps 4 amps 6 amps 4 amps Distribution boards 1 2 3 2 Battery back-up board 1 1 1 1 Note: One fire alarm board can be connected directly to the PS902. If a fire alarm board is desired for the PS904, PS906 or PS914 it can be connected to a distribution board.
Electric power transfer accessories EPT Electrical power transfer PNT Pneumatic transfer Electric Power Transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideal for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. The EPT-2 and EPT-10 are U/L listed as “miscellaneous door accessory”.
Monitor strikes Monitor strikes are designed to offer remote door monitoring through the use of a signal switch mounted in the strike to monitor the latch bolt. This series of monitor strikes is designed for use with Von Duprin and most other manufacturers’ rim, mortise, surface and concealed vertical rod exit devices and cylindrical, mortise and unit type locks. Tripper The monitor strike replaces the standard door strike.
Monitor strikes Basic monitor strike circuit Power supply same voltage as lamps with sufficient current capabilities Series 4570T1, 4670-T1, 4690-T2, 4690-1-T2 Model # 4570-T1 4670-T1 4690-T2 4690-1-T2 Lockset Cylindrical locks Cylindrical locks Concealed vertical rod exit devices Concealed vertical rod exit devices # Doors Single or pair Single or pair Wide stile pair of doors Narrow stile pair of doors Compatibility (with tripper type) Schlage ⁄29" (13mm) Cyl.
Monitor strikes dimensions 4263 4670-T1 (29mm) (41mm) 1/4" Top 1 1/8" 1 5/8" (6mm) 13/16" 13/16" 2 7/8" 1 5/16" (73mm) (21mm) (21mm) 2 3/4" (33mm) 1 1/8" (70mm) (29mm) 1" (25mm) 7/64" 11/64" 1 1/8" (4mm) 4268-T1 (3mm) 1 17/32" (39mm) (29mm) 4690-T2 1" Top (25mm) Monitor strikes dimentions 1" (25mm) 6" (152mm) 1 5/16" 3 1/4" (33mm) 1 5/16" (83mm) 13/16" 1 5/8" (21mm) (6mm) (29mm) (41mm) 3/32" 1/4" 1 1/8" (33mm) (2mm) 1 1/4" 4570–T1 1 25/32" (45mm) (32mm
Mullions Electrified removable mullions are used with pairs of doors eq.uipped with rim mounted exit devices. Each includes an electric cable with five conductors wired to a twist-apart plug. The soffit fitting is supplied with a pre-wired mating socket. 4754 — Prepared for two 4263 monitor strikes. Use with all Von Duprin rim panic devices. Steel mullion dimensions 4854 — Prepared for one 6111 electric strike and one 299 strike. Indicate handing for electric strike.
Notes 38 • Von Duprin Door control and security hardware
Notes Von Duprin Door control and security hardware • 39
About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2013 Allegion 009981, Rev. 11/14 www.allegion.
