Specifications

11
VonDuprinDoorcontrolandsecurityhardware•11
6100Serieshowtoorder
6100Serieshowtoorder
 6112- FSE - DS - 24 - S024 - US3- EB
Model
Power
failure mode
Dual switch
*
Voltage
Rectifier kit
*
Finish
Buzzer
*
3 41 2 5 6 7
* Optional
Ordering information
3 Dual switch (optional)
DS Monitors latch bolt and lock status.
DS switches rated at 24 VDC
50 milliampere - 2 amps.
DS-LC Optional for computer monitoring.
Monitors latch bolt & lock status.
DS switches rated 24 VDC
50 milliampere or less.
4 Voltage (VDC)
24 Low voltage DC power
12 Low voltage DC power
If AC power is required specify rectifier kit below.
5 Rectifier kit (optional)
SO12 Converts 12 VAC voltage to 12 VDC
to operate the solenoid
S024 Converts 24 VAC voltage to 24 VDC
to operate the solenoid
6 Finish
US number/Von Duprin number
US3/85 Plated polished brass on
stainless steel
US4/84 Plated dull brass on stainless steel
US10/06 Plated dull bronze on stainless
steel
US10B/86 Plated dark bronze on
stainless steel
US32/31 Stainless steel, polished
US32D/32 Stainless steel, satin
7 Buzzer (optional)
EB Entry Buzzer.
Only available if Fail-Secure (FSE) is specified.
1 Model
6111 See chart on page 3 to make the
proper selection
6112 See chart on page 3 to make the
proper selection
6113 See chart on page 3 to make the
proper selection
6114 See chart on page 3 to make the
proper selection
6121 See chart on page 3 to make the
proper selection
2 Power failure mode
FSE Fail-secure. Requires power to be
applied to unlock the strike lip. On
loss of power, the strike lip is
locked.
Fire-rated.
FS Fail-safe. Requires power to be
applied to lock the strike lip. On loss
of power, the strike lip is unlocked.
Non-fire-rated.
Selections correspond with the numbers above