Specifications

28
28• VonDuprinDoorcontrolandsecurityhardware
Alarmedexitdevices
Alarmedexitdevices
The DE5101, like the Chexit system, is used on delayed exit
application and is ideal for controlled areas. This concept in
delayed exit systems combines life safety with the needs of
security and meets all requirements of NFPA 101 for “Special
Locking Arrangement.”
The DE5101 is commonly used on narrow stile doors where a
standard or narrow stile Chexit is not practical. DE5101 Delayed
Exit System uses a Chexit logic board and a Von Duprin RX
(request to exit) panic device to control a Locknetics Direct Hold
Magnetic Lock.
The Chexit module for the DE5101 is installed in a control box and
mounted in the wall adjacent to the door. Features and functions
of the standard Chexit exit device are available on the DE5101
(see page 22).
The DE5101 includes decal for application on door.
“PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15
SECONDS”. This is a code based requirement.
Cylinders — Cylinders are not furnished with the DE5101 system
and must be specified when ordering. Uses a standard
1
1
⁄4" (32mm) mortise cylinder for the control.
(Schlage cam - B502-191)
To order, specify:
1. DE5101
2. M420, M450, or M490 magnetic lock (order direct
from Schlage Electronics).
3. RX22/33A/35A/98/99 device.
4. PS900 Series
5. EPT-2/10
Specifications
Continuous duty – 24VDC
Current holding DE5101 without magnetic locks – 300 mA
External alarm contact – 1 ampere @ 24VDC
Fire alarm input, external inhibit input, door position input –
set-up for normally closed dry contacts.
DSM
NO
C
NC
320, 350,
OR 390
MAGNETIC
LOCK
GRN
ORG
YEL
RED
WHT
GRN
YEL
ORG
BLU
BRN
GRY
VIO
BLK
ORG
ORG
GND
+24
GND
NEU
HOT
120
VAC
1 AMP
EPT-2
FIRE
ALARM
CONTACT
NC
RX DEVICE
YEL
RED
BLU
TO
FIRE ALARM
PANEL
2X18
10X18
2X18
JUNCT. BOX
2X18
840
3X14
120 VAC
1 AMP
MAGNETIC LOCK:
USE LOCKNETICS
320, 350 OR 390
RX
DE5101
EPT- 2
OR
UL APPROVED
ELECTRIC HINGE
4X18
DE5101
JUNCTION
BOX
PS914
Size: 3.75" x 5.57" x 2.50"