Specifications

30
30• VonDuprinDoorcontrolandsecurityhardware
GUARD-XExitdevice
GUARD-XExitalarmlock
2670 GUARD-X provides secure, alarmed code-compliant
protection for secondary emergency exits. The GUARD-X exit
alarm lock readily identifies the door on which it is mounted as
an emergency exit and secures the opening against unauthorized
use. It is ideal for deterring the in restaurants and retail
establishments such as: discount stores, grocery stores, drug
stores, clothing stores and sporting goods stores.
The GUARD-X lock provides secure protection through a large
stainless steel deadbolt, which is 2" x
1
⁄2" (51mm x 13mm) and
has over
3
⁄4" (19mm) throw. The engagement area into the strike
is over 1
1
⁄4" (32mm) square inches. The cast aluminum latch
case protects the internal mechanism and resists tampering or
vandalism from inside the door. This unit has been tested to
withstand up to 1600 pounds of static load force against the
door.
GUARD-X does not allow re-latching or resetting the alarm aer
an unauthorized exit, other than by an authorized person with a
key. A 100-decibel alarm provides clear, attention getting
warning for an unauthorized exit or attempted exit. The armed
indicator light informs the owner that the alarm is armed, and an
audible low-battery alert signals the owner to replace the battery
when necessary.
A standard 9-volt battery powers the alarm. An exterior 9-volt
power supply is available, Model PT-790, a 120VAC plug-in.
When using the external power supply, the 9-volt battery
functions as a battery backup during a power failure.
GUARD-X is armed and disarmed by key using a standard rim
cylinder. It can be operated from the building exterior by a
standard rim cylinder, so an authorized user can easily arm and
disarm it to enter or exit the building when required. When using
exterior operation a pull trim is recommended, use 210DT or
230DT. Rim cylinders are not furnished and must be ordered
separately.
The 267 strike is furnished standard for single door applications.
The optional 2609 strike is available for double door
applications.
The GUARD-X non-handed design means the installer can
mount it for either hand by just removing and reversing the
“EMERGENCY EXIT – ALARM WILL SOUND” sign built into the
device. The standard warning sign is in English with Braille;
French and Spanish are available.
GUARD-X is UL/cUL listed for Panic Exit Hardware, complies with
NFPA 101 Life Safety Code, meets UL305 requirements and is
tested in accordance to ANSI A156.3 Grade 1 Panic Hardware. It is
compliant with NFPA 101 Life Safety Code by providing a push
pad that extends at least one-half the width of any door up to
48" wide. The impact-resistant end caps meet UL305
requirements by providing a design that will not catch on
clothing during egress.
To order, specify:
1. Model 2670
2. Finish: US28, 313, 315.
3. Strike if other than standard 267.
4. Language if other than English.
5. Specify Rim Cylinder or Sex Bolts if required.
6. Outside trim if needed.
EMERGENCY EXIT ONLY
ALARM WILL SOUND
4
1
/16"
(109mm)
7"
(179mm)
4
1
/8"
(105mm)
32
1
/2"
(826mm)
2
3
/4"
(70mm)
Touchbar height
to finished floor
40" (1016mm) at center
Door width range 36" (914mm) to 48" (1219mm)
Touchbar
projection —
neutral 4
1
/8" (103mm)
depressed 2
3
/4" (70mm)
Latch case
housing
7" (179mm) x 4
1
/16" (103mm) x 4
1
/8" (105mm)
Device length 32
1
/2" (826mm)
Minimum stile
requirement
Single door - 5
7
/8", Double door - 6
1
/4"
Note: Von Duprin trim does not thru-bolt to the Guard-X. Ives door pulls 8102-6 and
8105-6 offer dimensions that align and thru-bolt to the Guard-X Exit Lock - Order
separately from Ives.