User`s guide
• To use Tracker to transfer a call to a park orbit for retrieval and
transmit the call’s park orbit code and caller ID information (if
available),
1. Answer call and press TRANSFER/CONFERENCE.
2. Dial extension number.
3. If the called station does not answer or is busy, press
(INTERCOM, and dial ✳ 8).
4. Hear confirmation beep (Tracker page accepted) or hear busy tone
(Tracker page not accepted).
5. Press SPEAKER button to end.
NOTE: Tracker parked calls will recall to your station after a
pre-programmed time-out. You can either replace the call into
another Tracker page orbit or retrieve the call for servicing.
• To retrieve a call that you parked using the Tracker option,
1. Press TAP.
• If you receive a parked call message on your Tracker pager,
1. Go to any system station.
2. Press INTERCOM.
3. Dial Tracker pager displayed orbit code (#800–#899).
4. Retrieve call.
• To enable or disable a Tracker pager at your station,
1. Press INTERCOM.
2. Dial code #07to enable pager, or #06to disable pager.
3. Enter extension number.
Using The Other Telephone Features GCA70–249
7–18 Non-LCDReferenceManual