Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)
9
⑦ PAUSE
To pause the video playback, press the “PAUSE” button. Then the video displaying will be stopped.
To continue playback, push the “PLAY” button.
⑧ MENU/ESC
It displays menu option or go back to the previous.
⑨ UP(▲) / DOWN(▼)
To change a menu field, use the “UP” or “DOWN” buttons.
⑩ SELECT/EDIT
Use this button to change values on main menu or sub menu setting.
LED Light
(a) GREEN: The DVR unit is powered up and running.
(b) RED: System is in Recording Mode or in Playback Mode.
(c) IR Remote Receiver
PTZ
Use this button to enter PTZ mode.
2.3 Rear Panel
① AUDIO OUT
Use “AUDIO OUT” port for speaker (mono)
connecting, this port is audio output for
playback too.
② AUDIO IN
Use “AUDIO IN” port for microphone
connection. If signal audio input is from
channel 1, there will be audio output in
channel 1 view and quad view. If signal
audio input is from channel 2, there won’t
be audio output until in channel 2.
③ VIDEO INPUT
Use this BNC port to connect cameras to DVR system. You might need BNC connector for each (CH1-CH4)
camera connection.
④ VIDEO OUTPUT
Use this port to connect DVR to the monitor. There is one video output. You can also connect one monitor
at the same time which will display the same video image on both monitor and LCD monitor. Also, you can
use the video output port to connect VHS device for tape backup.