Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)

4. HARDWARE SETUP

4.1 IDE Hard Disk Drive Installation

NOTE: Make sure that HDD jumper setting as “MASTER”

Before installing hard drive, set jumper as “MASTER”.

The master jumper setting varies depending on the hard drive

manufactures.

Refer to manufacture’s manual for master jumper setting.

For example, this model of HDD is Seagate.

Connect the ribbon cable (IDE) cable & power cable

4.2 SATA Hard Drive Installation

Connect the cables as follows.

Back side of hard disk