Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)
8
2.2 Front Panel
A series of button on DVR front panel make a system to operate its basic functions, such as recording,
playback, fast-forward, reverse, etc. For more details about the DVR menu, refer to “ 5. SETUP”.
** The front key panel feature can vary but the functionality of each button is same.
① Quad , CH1 , CH2 , CH3 , CH4
Use this button for full screen display for each camera channel or quad display on the monitor screen. If you
push “Quad” camera selection button, DVR will display all 4 channels (cameras) at the same time in quad
screen.
② REC
Press “REC” button to start manual recording. Then you will see this mark ‘●’ on the selected channel of the
screen, which means that the channel is now recording.
To stop manual recording, press “REC” again during recording mode.
③ STOP
To stop playback, press the “STOP” button.
④ PLAY
After recording, press “PLAY” button to start video playback.
Playback will start with the oldest unread video data and then continue playing.
⑤ FWD
This is the fast forward button. To play the recorded stream faster, press the “FWD” button.
There are three levels of fast forward playback speed.
(a) FF 1 ( ) : Play two times faster (x2) than the normal play.
(b) FF 2 ( ): Play three times faster (x3) than the normal play.
(c) FF 3 ( ): Play four times faster (x4) than the normal play.
To change the fast forward play back speed level, press the “FWD” button again.
⑥ REW
This is the rewind button. To play the recorded stream backward, press the “REW” button.
[NOTE]: The fast forward and reverse playback speeds will vary depending on the frame rate and record
quality settings, as well as the number of channels recorded.