Manual

3
40-56 Vdc
B
+
-
A1
ONLY WITH COMELIT RED CABLE 2E7T000500
ONLY WITH COMELIT RED CABLE 2E7T000500
FIXED POE
SETTABLE POE
NON POE
A2 A3 A4
Art 1456B
t.
INTERFACE B
IP ADDRESS AUTOIP
INTERFACE A
STATIC IP ADDRESS
192.168.1.200 (default)
ROUTER
Installer PC
ViP SYSTEM
with ViP Manager
version 2.3.0 and higher
with active
internet connection
INTERFACE A
STATIC IP ADDRESS
192.168.1.200 (default)
40-56 Vdc
B
+
-
A1
ONLY WITH COMELIT RED CABLE 2E7T000500
ONLY WITH COMELIT RED CABLE 2E7T000500
FIXED POE
SETTABLE POE
NON POE
A2 A3 A4
Art 1456B
t.
ROUTER
Art.1441
Art.1441B
ViP SYSTEM
Installer PC
with ViP Manager
version 2.3.0 and higher
with active
internet connection
Conguration of Art.1456B
1) Connection
 Article1456B has 2 network interfaces, A and B, labelled for easy identification, which can be configured separately to meet dierent system
requirements. Depending on the type of system, connect the devices as shown in the following figures:
√ This operation requires a PC loaded with the software ViP Manager version 2.3.0 or later (downloadable from the website www.
comelitgroup.com).
√ An active internet connection is also required.
All system devices form part of a single network, so it it is
only necessary to configure interface A.
In this case, DO NOT alter the configuration of interface B.
Take particular care with regard to the network
interface settings and do not configure interfaces A
and B with the same addresses or similar parameters:
each IP address must be unequivocal, the addresses
of the interfaces A and B must not belong to the same
subnet.
VIP NETWORK + INTERNET CONNECTION NET WORK SYSTEM WITH SINGLE NETWORK
< BACK