Manual

4
INTERFACE A
STATIC IP ADDRESS
192.168.1.200 (default)
192.168.1.X
192.168.1.1
A1
ONLY WITH COMELIT RED CABLE 2E7T000500
ONLY WITH COMELIT RED CABLE 2E7T000500
FIXED POE
SETTABLE POE
NON POE
A2 A3 A4
Art.1456B
t.
ROUTER
...
Installer PC
...
INTERFACE A
STATIC IP ADDRESS
192.168.1.200 (default)
192.168.0.X
A1
ONLY WITH COMELIT RED CABLE 2E7T000500
ONLY WITH COMELIT RED CABLE 2E7T000500
FIXED POE
SETTABLE POE
NON POE
A2 A3 A4
Art.1456B
t.
ROUTER
... ...
Installer PC
192.168.0.1
a
b
c
d
Installer PC
SYSTEM
SCAN
IN DHCP
AN IP COMPATIBLE
WITH THE SYSTEM
WILL BE ASSIGNED
TO THE PC
E.G. 192.168.1.30
During the system scan...
2) ViP Manager addressing
default address of the device (192.168.1.200) belonging to the
same router network (e.g.: 192.168.1.1)
OBSERVE THE FOLLOWING PROCEDURE IN CASE 1
default address of the device (192.168.1.200) NOT belonging
to the same router network (e.g.: 192.168.0.1)
interface A must be assigned
a new Static IP address belonging to the same
network as the devices connected to interface A
PERFORM A DHCP SYSTEM SCAN AND ASSIGN A VIP ADDRESS
CASE 1
1. From Options [a] / Local connections [b] tick DHCP Enable [c] and confirm [d].
Follow the procedure below to perform a system scan in DHCP, to locate all the devices connected to interfaces A and B:
• an IP address will be automatically assigned to the devices in addressing mode Autoip (connected to interface B);
• an IP address will be automatically assigned to the devices in addressing mode DHCP (connected to interface B), if the system
is connected to a server with the DHCP function active;
• devices with Static IP address will be identified only if they have a network address that is compatible with that of interface A.
CASE 1 CASE 2
< BACK