Manual

192.168.0.X

INTERFACE A

STATIC IP ADDRESS

192,168.0.5

192.168.0.1

ONLY WITH COMELIT RED CABLE 2E7T000500

FIXED POE

SETTABLE POE

NON POE

A2 A3 A4

Art.1456B

ROUTER

...

Installer PC

...

3. Launch the system scan by pressing Scan System [e]

4. In Addressing/ IP address [g] assign device 1456B a Static IP address [h] and a IP netmask [i] compatible with the system

for example IP: 192.168.0.5, netmask: 255.255.255.0 (warning: the IP address must not already be in use).

5. Enable "Use default gateway" [l] ONLY for the interface connected to the router (interface A by default)

6. Set the gateway address[m] , for example 192.168.0.1 press Write page [n] to save the current settings.

» the 1456B will appear in the device list [f]

» device 1456B will now be in the same network as the router (192.168.0.X)

In the cases of "ViP Network + Internet connection network" systems, take particular care with regard to the

network interface settings and do not configure interfaces A and B with the same addresses or similar parameters:

each IP address must be unequivocal, the addresses of the interfaces A and B must not belong to the same subnet.

Assign to device 1456

network settings that

are compatible with

those of the devices

connected to interface

A so that they can

communicate.

Enable "Use default

gateway" ONLY for the

interface connected to

the router (interface A

by default)

CASE 2

< BACK