User Manual

14
1.1.4. RS485 Address [NOT VIP]
The value of this parameter is used only in special applications.
PROCEDURE DISPLAY INFO DESCRIPTION
Access configuration (see “Accessing/
exiting the configuration stage”)
Select the menu SETTINGS / SYSTEM
PARAM. / ADDRESS RS485
MAIN
SETTINGS
SETTINGS
SYSTEM PARAM.
SYSTEM PARAM.
ADDRESS RS485
ADDRESS RS485
0000 h i
Scroll through the menu using or .
Press
to confirm.
Press
to return to the menu level
above.
The current value of the parameter appears
on screen.
Enter the desired value using the
or
keys.
ADDRESS RS485
0250 h i
RANGE: from 0 to 255.
EXAMPLE: Entering address 250.
Press the
key to confirm.
PARAMETER
CHANGED
Exit configuration (see “Accessing/exiting
the configuration stage”)
1.2. Language
The value of this parameter is used to set the language in which messages are displayed.
PROCEDURE DISPLAY INFO DESCRIPTION
Access configuration (see “Accessing/
exiting the configuration stage”)
Select the menu SETTINGS / LANGUAGE
MAIN
SETTINGS
SETTINGS
LANGUAGE
ENT.LANG.
ENGLISH h i
Scroll through the menu using or .
Press
to confirm.
Press
to return to the menu level
above.
The current value of the parameter appears
on screen.
Scroll through the list using
DEFAULT(italiano)
ENT.LANG.
ITALIANO h i
N.B. If the LANGUAGE parameter is set
to DEFAULT, you will be asked to set the
language again at the next startup.
Press
to confirm.
PARAMETER
CHANGED
Exit configuration (see “Accessing/exiting
the configuration stage”)