User Manual

16
This procedure can be used to view:
• the firmware version
• the number of users stored [NOT VIP]
• the RS485 address [NOT VIP]
• call management
PROCEDURE DISPLAY INFO DESCRIPTION
Access configuration (see “Accessing/
exiting the configuration stage”)
Select the menu INFO
MAIN
INFO
Art.3072/B
1.1 h i
Scroll through the menu using or .
Press
to confirm.
Press
to return to the menu level
above.
Scroll using
Press the key to exit the menu.
Exit configuration (see “Accessing/exiting
the configuration stage”)
2. Info
DATA MANAGEMENT USING 1249B [NOT VIP]
Entering a list (download)
Software Art.1249/B can be used to enter a list, on module 3072S, with the Username and Code fields in alphabetical order.
The following preliminary procedures must be performed:
INITIAL CONDITION
Module powered up in standby mode.
SELECT NAME
BY h i
PROCEDURE DISPLAY INFO DESCRIPTION
Connect the cable supplied with software
Art. 1249B to terminals TX / RX / - (or D /
D- if you have an RS485 line).
SELECT NAME
BY h i
Run software Art. 1249B. Consult the
online product Guide for the required
settings.
On software 1249/B, the CALL MODE
must be set as Standard.
Make the list with the Username and Code
fields in software Art. 1249/B, or load an
existing list.
SELECT NAME
BY h i
Press the Download button in software Art.
1249B.
DOWNLOAD
ENDED
If the download was completed
successfully.
Or:
DOWNLOAD
FAILED
If an error occurred during the download.