User Manual

8
Self-testing
Call management testing
Setting the language
When the device is switched on, it performs a test to check the type of system configured on the speaker
(Simplebus, Simplebus Top or VIP).
If the digital call module is new (or if the parameters have been restored to the default values):
• if the module is connected to a VIP system
» the module aligns with the speaker, self-configuring in “Call management VIP”, and receives all the information and data
stored on the speaker;
• if the module is connected to an SB TOP system
» the first call mode display screen shows the string ERROR
.
• if the module is connected to an SB system
» the first call mode display screen shows the string SIMPLEBUS.
If the digital call module has an enhanced directory:
• if the directory and speaker are configured dierently:
» the first call mode display screen shows the string ERROR
.
• if the directory and speaker are aligned:
» the first checking screen will show the system type SB / SB TOP / VIP.
Follow the procedure described in “1.1.3. Call management” if you want to align the directory module with the type
of system configured on the speaker.
INITIAL CONDITION
On power up.
CALL MANAGEMENT
PLEASE WAIT
The message PLEASE WAIT indicates self-
testing in progress.
CALL MANAGEMENT
SIMPLEBUS
At the end of self-testing the type of system
set is displayed (SIMPLEBUS by default).
Or:
CALL MANAGEMENT
ERROR
If the directory and speaker are configured
dierently.
Follow the procedure described in “1.1.3. Call management” if you want to align the directory module with the type
of system configured on the speaker.
If the LANGUAGE parameter is set to DEFAULT.
During startup (after call mode testing), you will be asked to select the operating language.
INITIAL CONDITION
DEFAULT(italiano)
INS. LINGUA
DEFAULT h i
The current value of the parameter appears on
screen.
PROCEDURE DISPLAY INFO DESCRIPTION
Scroll through the list using
INS.LANG.
ENGLISH h i
N.B. If the LANGUAGE parameter is set
to DEFAULT, you will be asked to set the
language again at the next startup.
Press
to confirm.
PARAMETER
CHANGED