Manual

1414
IMMOTEC STANDARD
Digital module Art. 3360B can be used in conjunction
with the Simplekey module Art. SK9001, Art. SK9020 by
connecting the two products via RS485 (see diagram on
page 35).
In this conguration, the use of Simplekey access keys
(badges) automatically allows entry of the corresponding
code/name (new key) or updating of the name only (if the
code already exists) in the directory of digital module Art.
3360B. Since a single user code (apartment) can have up
to 2 access keys associated with it under different names,
during a numerical code call from the digital module the rst
name of the 2 in alphabetical order will be displayed.
N.B.: Names cannot be entered and modied manually.
Badge acquisition only takes place when digital mode is in
standby.
IMMOTEC INDIRECT
Digital module Art. 3360B can be used in conjunction
with the Simplekey module Art. SK9001, Art. SK9020 by
connecting the two products via RS485 (see diagram on
page 35).
In this conguration the use of access keys allows
automatic updating of the Simplekey access key (badge)
name only, as it appears in the directory of digital module
Art. 3360B. The Immotec indirect codes and corresponding
names can only be entered from a PC using software Art.
1249B. Since a single user code (apartment) can have up
to 2 access keys associated with it under different names,
during a numerical code call from the digital module the rst
name of the 2 in alphabetical order will be displayed.
N.B.: Names cannot be entered and modied manually.
Badge acquisition only takes place when digital mode is in
standby.
MARIO ROSSI
CODE: 025 015
SCROLL CALL
CALL USER
_ _ _100
CALL CANC
1B. or scroll through the directory using
2. to call, press
3. to exit, press
INDIRECT CODE -
SIMPLEBUS or SIMPLEBUS TOP
In this mode the user is identied by a Name eld (optional)
and by a Code eld which is different for Simplebus and
Simplebus Top, see page 13 and by an Indirect Code with
no more than 6 alphanumerical characters (0...9, A...F).
Example:
User name= Mario Rossi
Code= 2 (for Simplebus) or 25 015 (for Simplebus top)
Indirect code= 100
The call can be made in the following ways:
` standby mode
1A. enter the indirect code (e.g. 100)
1B. or scroll through the directory using
MARIO ROSSI
CODE: 025 015
SCROLL CALL
2. to call, press
3. to exit, press
CALL USER
_25 015
CALL CANC
The call can be made in the following ways:
` standby mode
1A. enter the user code (e.g. 25 015)