Manual

15 15
1622
4680C
1621
4681
1622
4680C
1621
4681
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ Name only
This function is disabled by default.
It allows only the name to be displayed, without the user
code, when scrolling through the directory and during a call
from a user.
6. Enabling/disabling name-only display
SELECT LANGUAGE
SECOND LANGUAGE
CALL MANAGEMENT
NAME ONLY
OK OK
SCROLL ESC
9. press or to conrm
» * indicates the selected call mode
10. set the selector on porter module Art. 1622, 1622VC,
1621, 1621VC, 4680C, 4681 back to OFF, see Fig.
7. press or to conrm
» * indicates the type of system selected
» conrmation tone
8. to display the call mode, scroll through the list using
3. access programming mode, see page 6
4. select the menu items:
Settings ⇒ Call management
CALL MANAGEMENT
*SIMPLEBUS
SIMPLEBUS TOP
VIP
OK OK
SCROLL ESC
CALL MANAGEMENT
*STANDARD
INDIRECT CODE
IMMOTEC STANDARD
OK OK
SCROLL ESC
CAUTION: to modify the type of system and the call mode
it is necessary to erase the entire directory, see page 8.
1. set the selector on porter module Art. 1622, 1622VC,
1621, 1621VC, 4680C, 4681 to ON, see Fig.
2. connect the porter module to the terminal block
5. press or to conrm
6. to display the type of system, scroll through the list using
3. press or to conrm
SYSTEM PARAMETERS
SELECT LANGUAGE
SECOND LANGUAGE
CALL MANAGEMENT
OK OK
SCROLL ESC