Manual
1616
This function is disabled by default.
It is possible to enter the welcome message using software
Art. 1249B.
1. access programming mode, see page 6
2. select the menu items:
` Settings ⇒ Welcome message ⇒ Change
8. Entering the welcome message
CHANGE
ENABLE
STATIC MESSAGE
OK OK
SCROLL ESC
WELCOME
SCROLL OK
ESC CANC
PARAMETER
CHANGED
3. press or to conrm
4. enter the welcome message using the alphanumeric
keypad, for the use of special characters see table on
page 3
5. press or to conrm
6. to exit, press
7. Enabling/disabling the welcome message
This function can be used to enter a welcome message
(MAX 40 characters long, covering 4 lines in block capitals).
The welcome message alternates with the normal
information screens every 4 seconds.
N.B.: the message cannot be switched to the second
language when the SECOND LANGUAGE function is on
(see “3. Setting the second language" page 12).
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ Welcome message ⇒ Enable
NAME ONLY
YES
*NO
OK OK
SCROLL ESC
CHANGE
ENABLE
STATIC MESSAGE
OK OK
SCROLL ESC
WELCOME MESSAGE
YES
*NO
OK OK
SCROLL ESC
3. press or to conrm
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection