Manual
2222
2. Relay contact
2A. Enabling/disabling the actuator function on
the relay contact
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Relay contact ⇒ Actuator
function
ACTUATOR FUNCTION
IN PARALLEL TO SE
VIEW
OK OK
SCROLL ESC
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Lock on SE ⇒ View
1D. Viewing the parameters of the door lock on
the SE output of the porter module
TYPE AC PLUS
CONFIRMATION TONE
STANDBY LOCK REL.
TYPE
CONFIRMATION TONE
STANDBY LOCK REL.
VIEW
OK OK
SCROLL ESC
3. press or to conrm
3. press or to conrm
This function is enabled by default.
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Lock on SE ⇒ Standby lock
rel.
1C. Enabling/disabling the standby lock release
on the porter module
TYPE
CONFIRMATION TONE
STANDBY LOCK REL.
VIEW
OK OK
SCROLL ESC
STANDBY LOCK REL.
*YES
NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
3. press or to conrm
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection
» conrmation tone