Manual
2424
3A. Enabling/disabling the actuator function on
the S serial line
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ S serial ⇒ Actuator function
3. S serial
ACTUATOR FUNCTION
OK OK
SCROLL ESC
ACTUATOR FUNCTION
YES
*NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
3. press or to conrm
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection
» conrmation tone
2C. Viewing the relay contact parameters
1. access programming mode, see page 6
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Relay contact ⇒View
ACTUATOR FUNCTION
ACTIVATION TIME 03
IN PARALLEL TO SE
ACTUATOR FUNCTION
IN PARALLEL TO SE
VIEW
OK OK
SCROLL ESC
3. press or to conrm