Manual

2828
VOICE MESSAGES
CALL
SELF IGNITION
DEFAULT SETTINGS
OK OK
SCROLL ESC
DEFAULT SETTINGS
YES
*NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
1. Installing the USB driver for connecting Art.
3360B to a PC
CAUTION: make sure that the option to install unsigned
drivers (drivers that have not passed Windows Logo
testing) is enabled.
1. connect the cable attached to Art. 1249B to the USB
connector on the rear of the directory module
2. access programming mode, see page 6
3. select the menu items:
Settings ⇒ Type of download ⇒ USB
Software Art. 1249B
3. press or to conrm
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection
» conrmation tone
SELF IGNITION
*YES
NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
7A. Restoring the default values of the porter
module
1. access programming mode, see page 5zselect the
menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Default settings
7. Default settings
This function is used to restore the default settings:
De-misting heating element = disabled
Audio-visual messages = disabled
Door lock command on SE in AC
Door lock time = 2 sec + tone disabled
C.NC.NO relay in parallel with SE
Lock release always enabled
Actuator function on S serial line = disabled
Answer wait time = 60 sec
Conversation time = 90 sec
Self-ignition = enabled
Conrmation tone on user call = enabled
Reset wait time = 10 sec
Send call = single
Control of internal units connected to porter module = up
to 70
System mode = Simplebus
4. select YES to enable the function, NO to disable it
5. press or to conrm
» * indicates active selection
» conrmation tone