Manual

66
2. Changing a name or a code in the directory
CAUTION: not available if the call mode is IMMOTEC
STANDARD or IMMOTEC INDIRECT, see page 13
1. access programming mode, see page 6
2. select the menu items:
Name directory ⇒ Change names
8. to exit, press
CODE:
_ _ 2
OK
ESC CANC
5. to conrm, press
6. enter the code (max. 3 digits) using the alphanumerical
keypad
7. press to conrm
MARIO ROSS_
OK
ESC CANC
1A. Automatic entry
It is possible to download a name list using software Art.
1249B, see page 28.
CAUTION: not available if the call mode is IMMOTEC
STANDARD or IMMOTEC INDIRECT, see page 13.
1B. Manual entry
1. access programming mode, see page 6
2. select the menu items:
Name directory ⇒ Enter names
Name directory
1. Entering names in the directory
ENTER NAMES
DELETE NAMES
CHANGE NAMES
CLEAR ALL NAMES
OK OK
SCROLL ESC
3. press or to conrm
4. enter the name using the alphanumeric keypad, for the
use of special characters see table on page 3
ENTER PASSWORD:
*****
9
OK CANC
Accessing the programming mode
1A. connect terminal PRG to GND and power up the
module
1B. or press and enter the default supercode 778899
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
INFO
OK OK
SCROLL ESC
2. press to conrm