User guide

WPS Button

Wireless AP

[IPCAM791A] [IPCAM794A]

Note:

1. WPS may not work if your AP is congured with a “hidden” SSID.

2. If any WPS-enabled AP is not detected, the camera will search APs for 60 seconds after pressing the WPS button,

and if the camera still can not detect an AP after 1 minute, the wireless setup will be cancelled.

3. If a camera is assigned with a xed IP outside the AP’s network segment, wireless setup will fail.

4. A wired connection always has a higher priority, and hence wireless setup will not take eect when the RJ45 LAN

port is connected.