/3” CCD SONY EXview HAD II HIGH RESOLUTION COLOR DAY & NIGHT CAMERA ART. MCAM437B-MCAM438B MCAM537B-MCAM538B Please read this manual thoroughly before use and keep it for future reference. Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelitgroup.com e-mail: export.department@comelit.
DNR Super High Resolution Day & Night Color Camera ii
WARNINGS AND CAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The contents of the package includes: 1. Color CCD camera 2. Mini-DIN connector (for video-or dc-type auto-iris lens) 3. CS adapter ring for C mounting “C” lenses 4.
INTRODUCTION The camera provides high-quality images using SONY 1/3” CCD and digital Signal process LSIs. Features: ● 1/3" EXview HAD CCD Ⅱ for an image of high sensitivity ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Digital Wide Dynamic Range (Xtended Dynamic Range) Excellent picture quality 700 lines of resolution 0.15Lux(Color), 0.01Lux(B/W) @ F1.
CAMERA OVERVIEW LEFT button UP button ENTER button RIGHT button DOWN button power Indicator video output Connector (BNC) AC/DC compatible input terminal AC power cord 2
OSD MENU STRUCTURE SETUP MENU (page 1) LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET LENS SHUTTER/AGC AUTO IRIS MANUAL AUTO MANUAL RETURN RETURN NEXT (page2) EXIT SAVE ALL WHITE BALANCE BACKLIGHT ATW PUSH USER 1 USER 2 ANTI CR MANUAL PUSH LOCK BLC HLC RETURN RETURN PICTURE ADJUST ATR MOTION DET MIRROR BRIGHTNESS CONTRAST SHARPNESS HUE GAIN LUMINANCE CONTRAST DETECT SENSE BLOCK DISP MONITOR AREA AREA SELECT RETURN RETURN RETURN 3
SETUP MENU (page 2) PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET PRIVACY DAY/NIGHT AREA SEL COLOUR TRANSP MOSAIC AUTO COLOUR B/W RETURN RETURN BACK (page 1) EXIT SAVE ALL NR CAMERA ID SYNC NR MODE Y LEVEL C LEVEL (titling) INT RETURN RETURN RETURN LANGUAGE CAMERA RESET ENGLISH CHINESE GERMAN FRENCH RUSSIAN PORTUGUESE SPANISH 4 (return the camera to factory defaults)
LENS MANUAL Manual lens only (Note Since Manual mode AUTO mode is changed SHUTTER/AGC to SHUT+AUTO IRIS when MANUAL is changed to AUTO, AUTO MODE should be changed to AUTO IRIS in SHUTTER/AGC) AUTO TYPE (DC / VIDEO) Sets the type of mechanical iris (Video lens is not supported) MODE (OPEN / CLOSE / AUTO) Sets the type of control to be applied over the mechanical iris. SPEED (0 – 255) Sets the convergence speed of the mechanical iris.
WHITE BAL ATW (Auto Trace White balance) SPEED (0~255) Adjusts the pull-in speed of ATW. DELAY CNT (0~255) Sets the time-based hysteresis of ATW. ATW FRAME (X0.5/X1/X1.5/X2) Sets the pull-in frame magnification. ENVIROMENT (indoor/outdoor) Preset for either indoor or outdoor applications of the ATW PUSH Wide range Auto White Balance mode (AWB) USER1 & 2 Both USER 1 & 2 can be individually set up for specific applications.
ATR ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. LUMINANCE (LOW/MID/HIGH) Sets the extent of the luminance compression CONTRAST (LOW/MIDLOW/MID/MIDHIGH/HIGH) Sets the extent of the contrast enhancement MOTION DET DETECT SENSE (0~127) Sets the motion detection sensitivity (0=low sensitivity, 127=high sensitivity) BLOCK DISP (OFF / ON / ENABLE) Applies a Motion block trace in the selected area.
LEFT (0~474) 0=left RIGHT (0~474) 474=right COLOUR (1~8) Sets the colours of the privacy zones. TRANSP (0.00/0.50/0.75/1.00) Sets the transparency of the privacy zone area if colour is selected. MOSAIC (ON/OFF) Sets the mosaic function as the privacy to ON or OFF. (Note: when ON, transparency needs to be set at 0.00 and privacy zones can only be 1 colour OR mosaic and not mixed) DAY/NIGHT AUTO BURST (ON/OFF) Allows the colour burst signal in monochrome to be removed if required.
CAMERA ID Sets the camera ID to ON or OFF. A title of 26 characters per line can be applied. Use the joystick to navigate the cursor. Pushing centrally on the joystick will allow selection of that character. The arrows at the bottom allow you to move the cursor without changing the character. CHR1 Allows you to edit line 1 CHR2 Allows you to edit line 2 (CHR2 is no using) CLR Inserts a space POS Allows you adjust the location of the camera ID title display.
DC IRIS LENS The lens is not supplied with this camera. Purchase a lens suitable for your requirements. These cameras accept both C-and CS-mount type lens. ● For using main functions it is recommended to use Auto Iris Lens with DC type. ● If the lens is marked with fingerprints other marks, the image quality might be poor. ● It is recommended to use a high quality lens to improve the image quality under low illumination. 1.
SPECIFICATIONS MODEL Power source (12VDC/24VAC) 230 VAC 100÷240 VAC 12 VDC / 24 VAC ±10% 50Hz ±1Hz 3.5 W (300 mA) 4.0 W (55 mA) 1/3″ SONY EXview HAD CCD II 1020 (H) x 508 (V) 1020 (H) x 596 (V) 976 (H) x 494 (V) 976 (H) x 582 (V) 2:1 Interlace Power Power consumption Image sensor Total pixels Effective pixels Scanning system 15.734 KHz (H) x 59.94 Hz (V) Scanning frequency General Connector & etc. Sync. system Electronic Shutter Resolution Min.
MEMO
Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelitgroup.com e-mail: export.department@comelit.
