Manual

4.1.1 Event operations

① Select the Device tab.

② Select a device from the device tree.

③ Select an event type to set up from the combo-box.

④ Enable/Disable the selected event operation from the list.

⑤ Set up the event operations.

⑥ If you want to apply the same operations to other devices, select the Apply to button and select

device(s)/group(s).

Table 8 Device Event Operations

Event Operations Options Settings

Enable Yes/No Enable/Disable the event operations

View Channel Dwell Time Amount of time to display the event channel

Live View What view to show the event channel on Live1,

Live2, Emap and All.

View Layout Dwell Time Amount of time to show the layout

Layout What layout to show in the Event view

Sound Enable Enable/Disable the sound

File Select the sound file, otherwise the default sounds

will be automatically be initiated

Record Dwell Time Event Recording independent on schedule

Preset Preset ID In the case of PTZ, move the preset

Manual Trigger Trigger ID If it supports manual trigger, it will trigger

Run External Exe File Execute an external application

Event Relay Relay Out List Select the Relay Out

* The Record operation in the device event list only affects the recording schedule. For example, if there

is a device which is configured that there is no recording (time/event) schedule from 9:00 AM to 10:00 AM.

If an event which operation is recording, is happened during that time, it would be recorded as configured

with above setting value.

* The Relay Out has the similar configurations of the device event. Please do not configure relay chains.

(For example, a manual trigger of device A relays a manual trigger of device B. And manual trigger of

device B relays manual trigger of device A. It makes relay chain continuously. It MAY cause endless event

operations)

* The View Channel option needs event channel setting on the Live1, Live2 and Emap. If there is no event

channel setting on them, it will not work.

* The Dwell Time values of the View Channel and View Layout have a minimum time out of 5 sec. If

another event occurs, the view channel and layout MAY be preemptive even though the value is over 5

seconds.