Manual

57
Chapter 11 – Local Playback
This describes how to search and replay the recorded data. It supports various searching and replaying
functions.
11.1 Date and Time Search
The playback view supports a maximum of 16 channels.
Figure 58 Playback View
11.1.1 Date and time search
① Select the Playback tab and select the ‘Time lapse’ tab from the playback control tab.
② Select a device/group/layout item from the device tree.
③ Drag it into the view screen. If you drag a layout, then split mode will revert automatically as it is
configured.
④ Select the date from the calendar. If there is any recorded data, the date will be highlighted in red
⑤ Select an hour item from the list. If there is any recording date, the number will be highlighted in red.
⑥ If the date and time is selected to replay, the time table will be shown with the recorded data
information from each channel.
⑦ Select the time (minutes) to replay.
11.1.2 Device group and multiple devices
If a group is dragged into a screen in the playback view then the screens would be set as the order of the
devices in that group.
For example, the group has 4 devices and the dragged screen number is CH 5, then the screen 5, 6, 7
and 8 would be set as the order of the devices in the group.