User guide

Control Indicator Guide
6
X Battery Recommendations and lead size
A fully charged battery and good connections are essential for the proper operation of your winch.
The minimum requirement for battery is 650 cold cranking amp. The voltage drop for the winch
motor must not exceed 10% of the nominal voltage of 12/24V DC.
The battery lead shall be 2 gauge with 1.83 m in length at most, otherwise a considerable voltage
drop will be happened.
X Cable-in / Cable-out Operation
For Wired Remote Control
1. To “ Winch or Cable - Out”, trigger → out
2. To “ Winch or Cable - In”, trigger ← in
3. To stop winching, release the trigger
For Wireless Control Module:
1. Press and hold the Cable In Button of the Transmitter for rope winding in operation.
2. Press and hold the Cable Out Button of the Transmitter for rope winding out operation.
3. To stop winching, release the Cable In or Cable Out Buttons.
Cable-Out Cable-In