Install Instructions

5
Heat Controller VFH InverterFlex
®
- Indoor Ductless Mini-Split
Operation of wireless remote control
Features and functions of wireless remote control
 Be sure that there are no obstructions between the unit’s receiver and remote control. Be careful not to drop the
remote control; Don’t let any liquid get inside the remote control, don’t put the remote control directly in sunlight or any
other place where it is very hot.
Signal transmitter
Remote controller
ON/OFF
MODE
MODE button
ON/OFF button
AUTO
COOL
DRY
FAN
HEAT
TEMP button
TEMP
FAN button
FAN
High fan
Medium-high fan
Medium-low fan
Medium fan
Low fan
AUTO
• Press this button, Auto, Low, Medium-low, Medium,
Medium-high, High speed can be sequentially
selected. Auto mode is the default mode. In dry mode,
the only available fan speed is low.
• Press this button, the following temperatures
can be set sequentially: the set temperature,
indoor ambient temperature and outdoor ambient
temperature. When the indoor unit rst powers on,
it will display the set temperature and this icon .
If the button is pressed again, this icon and the
indoor ambient temperature is shown. Pressing the
button a third time will display this icon and the
outdoor ambient temperature. 3 seconds later the
display will return to the set temperature or unless
there is another signal.
  Outdoor ambient temperature display range
is 0~60°C (32~99°F). However, if the outdoor
ambient temperature is below 0°C, it still will display
0°C (32°F). The display can’t show temps below
0°C (32°F).
• Press this button, Auto, Cool, Dry, Fan, Heat
mode can be selected sequentially. When
unit powers on, Auto mode is the default
mode. In Auto mode, the temperature is not
shown on the display. The unit will operate
in heating or cooling modes automatically
based on the room temperature. Under Heat
mode the initial set point is 28°C (82°F);
in other modes, the initial set point is 25°C
(77°F).
• Press this button, the unit will turn on, press
it once more, the unit will turn off. Sleep
function cancels while unit is off.
When
operating buttons
on the cover please
make sure the cover
is closed completely
on the remote.