User's Manual

6
Receiver DH10
6) Menu and settings
Menu control
Three different selections can be made:
To access the menu, press the menu control:
Back
Communication
Channel
Pair
Sound
Balance
Max volume
Fix volume
Settings
PIN-code
Charge
Language
Name
Button sound
Func. indicator
Factory Reset
Key lock
About
Scroll up
Press/select
Scroll down
Back (relates to both the main menu and submenus)
Here you can choose to return to the menu and to the
main display.
Communication
Channel
To use the receiver and the transmitter together, they
must be set to the same channel. The transmitter and
receiver are set to the default channel by the manufac-
turer.
This does not apply to units with both sender and
receiver. In this case the transmitter/receiver are
adjusted as described in chapter Radio range and
Channels .
Change channel:
1. Choose Channel in the menu.
2. Choose transmitter or receiver (this
applies only to units with both transmitter
and receiver).
3. Select a new channel using the menu control.
Channel information is also given when the units are
paired.
FFC (Free Frequency Check) indicates in green the suit-
able frequencies for the specific environment.
Please note! Switch off your other Digisystem transmit-
ters for correct result.
FFC dB indicates the noise level in dB for each channel.
The higher the (-)value, the lower the risk of interfer-
ence.
Pair
To use a receiver and transmitter together, they must be
paired. All transmitters and receivers are default paired
at the factory and will work together.
NB! To prevent eavesdropping, a new code key must be
generated and transmitted between the units by pairing.
Transmitting/receiving of pairing information along
with a new code can be performed from any Comfort
Digisystem unit with a display.
To pair units without a display, see section Pairing (via
pairing button) for more information. Pairing information
or a new code key can be received by several activated
units.