Comfort Digisystem User manual Comfort Digisystem Microphone DM10 North America / English
User manual Table of contents Page 1) Introduction to the Comfort Digisystem 3 2) Regulatory information 3 3) Functions of the Microphone DM10 4 4) Included accessories 4 5) Getting started 5 6) Menu and settings 5 7) More functions 7 8) Radio range and channels 7 9) Trouble shooting 7 10) Battery maintenance 8 11) Service and warranty 8 12) Technical data 8 13) Important safety instructions 9 Microphone DM10 2
1) Introduction to the Comfort Digisystem Thank you for choosing Comfort Digisystem. The products are easy to use, whether you use a hearing aid or not. Before using the product, please read this User manual carefully. Using the Microphone DM10 transmitter, the signal is transferred digitally, resulting in an excellent clear sound. The Comfort Digisystem products feature SecureStream Technology – a unique, patented digital technology allowing eavesdrop-secure radio transfer in real time.
3) Functions of the Microphone DM10 Function indicator On / Off Pairing button Microphone Function button Menu control Input for external sound source Charging socket 4) Included accessories • • • • • • Charger A11 Cable Split cable Necklace x 2 Clip on microphone Color stickers Clips Display Microphone DM10 Microphone DM10 4
) Getting started 6) Menu and settings Charging The Microphone DM10 is chargeable. Charge the DM10 at least 2 hours before using it the first time. An empty battery is fully charged within 2 hours. Menu control Three different selections can be made: During charging, the function indicator shows red and a lightning bolt appears through the battery symbol in the display.
Pair To use a receiver and transmitter together, they must be paired. All transmitters and receivers are default paired at the factory and will work together. NB! To prevent eavesdropping, a new code key must be generated and transmitted between the units by pairing. Transmitting/receiving of pairing information along with a new code can be performed from any Comfort Digisystem unit with a display. To pair units without a display, see section Pairing (via pairing button) for more information.
You can even adjust the level for Extern Mic and Line-in in this menu. Func. indicator Here you can enable or disable the function indicator. This function does not affect charging and pairing status. Factory reset Resets the unit to the factory settings. Also deletes all pairing information. To prevent eaves-dropping a new code key must be generated. Key lock Activates the key lock and thereby locks all buttons. Once the key lock has been activated, Unlock keys? appears in the display.
10) Battery maintenance The rechargeable products in the Digisystem series are equipped with Li-Po batteries, ie. the same type of batteries used for most mobile phones and laptop computers on the market today. These types of batteries are able to store large amount of energy in relation to their weight and volume. The capacity of Li-Pol batteries diminishes during its life cycle.
13) Important safety instructions Read these before using your product 17) Never use a transmitter or receiver set to a nonpermitted frequency. Check with the frequency authority in the country where the equipment is to be used. 1) Read these instructions. 2) Keep these instructions. 18) The product contains sensitive electronic equipment and must be handled carefully. 3) Heed all warnings. 4) FolIow all instructions.
Comfort Audio AB Comfort Audio AB, Box154, SE-301 05 Halmstad, Sweden Tel. +46 (0)35 260 16 00 Fax +46 (0)35 260 16 50 Local US office: Comfort Audio Inc, 350 South Northwest Hwy, Ste 300 Park Ridge, IL 60068 USA T (847) 656 5450 usa@comfortaudio.com www.comfortaudio.us MA0358 Ver 1.
