Instruction Manual

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

IS-ACTAPRIDE1824

REV0813

ACTA-BACK

Parts Included:

1 - Complete Acta-Back

Assembly with Mounting Bracket

To remove current backrest from back plate (A), remove knob (C).

Attach Acta-Back Assembly with Mounting Bracket (E/D) to back plate (A) by aligning buttons (B) with

cut outs in bracket (D).

Re-attach foam/cover to shell (E).

1. Feel between the backrest and the user's back for gaps and/or identify areas that require positioning adjustments.

2. Unzip access at the top of the back and remove the stays.

3. Mold the stays to fill in the gaps and/or provide positioning.

4. Reinstall the stays and have the user rest against the Acta-Back

5. This is an iterative process, continue making adjustments until the proper support and positioning goals have been met.

Lift the bottom of the foam/cover up and thread knob (C) through the bracket (D) into the back plate (A).

The Acta-Back

has patented moldable aluminum stays inserted into the cover.

These stays can be molded to meet the contour of the spine.

How to Mold the Aluminum Stays:

Attaching an Acta-Back to a Pride TRU-Balance 3 Power Chair, Sizes 18W – 24W

1 - 5/32” Hex Key