Quick Release User guide

ACTA-CONTOUR

Attaching Quick Release Compass Hardware (2 Point)

and Quick Release Compass Hardware (4 Point)

Toll Free 800.564.9248 www.comfortcompany.com 509 South 22nd Ave Bozeman, MT 59718

IS-ACTACONTOUR-BK-NC

REV0814

www.comfortcompany.com

PAGE 1
ACTA-CONTOUR ® Attaching Quick Release Compass Hardware (2 Point) and Quick Release Compass Hardware (4 Point) Toll Free 800.564.9248 www.comfortcompany.com 509 South 22nd Ave Bozeman, MT 59718 www.comfortcompany.
PAGE 2
ACTA-CONTOUR ® Attaching Quick Release Compass Hardware (2 Point) Attaching Quick Release Compass Hardware (2 Point) Parts Included: 1 - Complete Acta-Contour® Assembly with Quick Release Compass Hardware (2 Point) 1 - 5 mm Hex Key 1 - 2.5 mm Hex Key 1 Loosen the two clamp bolts (A) on both sides using the 5mm Hex Key. Tighten the clamps onto the left and right wheelchair canes. 2 Slightly loosen bolts (B) above and below the triangle on both sides using the 5 mm Hex Key.