Manual

COMFORT FOOT SINGLE ELEVATING LEG REST

PAD (FTSE & FTSTE)

Insert the shoulder bolt (A) into the washer

(B), mounting bracket (F) and thread

securely into the interlock cane clamp (C).

*NOTE: The various holes on the mounting bracket

(F) allow for varying foam height mounting.

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

Attach the interlock cane clamp to the leg

rest wheelchair tube. For 1” diameter

tubes, use the longer socket head cap

screws provided in the products kit bag.

Attach the mounting bracket (F) to the

foam pad assembly (G) using two of the

pan head screws (E). The third screw is

provided for aesthetic purposes.

*NOTE: The provided diagram shows the assembly

instructions for the left side leg rest.

IS-CFSINGLEELEVATINGLEGREST

REV0814

Parts Included:

1 - Single Elevating Leg Rest Assembly

3 - ¼ - 20 x ¾” Truss Pan Head Screws

1 - 5/32” Allen Wrench

1 - 3/16” Allen Wrench

1 - Clamp and Bracket Hardware Assembly

1 - 5/16” Shoulder Bolt

1 - Lock Washer

PAGE 1
Toll Free 800.564.9248 www.comfortcompany.com 509 South 22nd Ave Bozeman, MT 59718 COMFORT FOOT SINGLE ELEVATING LEG REST PAD (FTSE & FTSTE) Parts Included: 1 - Single Elevating Leg Rest Assembly 3 - ¼ - 20 x ¾” Truss Pan Head Screws 1 - 5/32” Allen Wrench 1 - 3/16” Allen Wrench 1 - Clamp and Bracket Hardware Assembly 1 - 5/16” Shoulder Bolt 1 - Lock Washer G C B D A F E 1 Insert the shoulder bolt (A) into the washer (B), mounting bracket (F) and thread securely into the interlock cane clamp (C).