Specifications

~ 4 ~
IMPORTANT
SPECIFICATIONS
Voltage
120V AC 60HZ;
Heating Power
1500 Watts/12.5 Amps
Dimensions
17.32” Wide x 4.49” Deep x 19.21” High
Weight
10.6 Lbs
Grounded Outlet
Over-Heat safety feature
WALL MOUNTING REQUIRED
LOCATING HEATER:
This heater is designed to be mounted on a wall only. It will not operate as a freestanding heater and should not be
modified to do so. For convenience and efficiency, install heater:
1. Where all clearances can be maintained. (see Page 5)
2. Where there is easy access for operation, inspection and service.
3. Within 5 feet of proper electrical outlet.
4. Away from any doorway or water source such as tub, sink, etc.
5. Insure there is no existing electrical wiring, plumbing or other obstructions in the area chosen.
6. Wall must be flat and must be a solid surface.
7. In the coldest part of the room.
8. Mounting screws are included for Dry Wall mounting only, for other installations the installer, home owner is
responsible to insure that the heater is securely mounted to wall.
Failure to position the heater in accordance with the guidance provided or failure
to secure heater securely to the wall could result in property damage and personal
injury.