Meijer.com -1- AiriSpa Owner’s Manual Models DS1oval110v • DSRND110V Oval AiriSpa Round AiriSpa Manufactured by: Comfort Line Products, Inc. 2717 N. Tamiami Trail N. Fort Myers, FL 33903 US: (888) 891-5585 Canada: (877) 633-8827 www.comfortlineproducts.
Meijer.com -2- User’s Guide WARNINGS / AVERTISSEMENTS WARNING: CHILDREN SHOULD NOT USE SPAS OR HOT TUBS WITHOUT ADULT SUPERVISION. WARNING: DO NOT USE SPAS OR HOT TUBS UNLESS ALL SUCTION GUARDS ARE INSTALLED TO PREVENT BODY AND HAIR ENTRAPMENT. WARNING: PEOPLE USING MEDICATIONS AND/OR HAVING AN ADVERSE MEDICAL HISTORY SHOULD CONSULT A PHYSICIAN BEFORE USING A SPA OR HOT TUB. WARNING: PEOPLE WITH INFECTIOUS DISEASES SHOULD NOT USE A SPA OR HOT TUB.
Meijer.com -3- U.L. AND E.T.L. SAFETY INSTRUCTIONS The following instructions are required to be printed by Underwriters Laboratory (U.L.) as well as ETL Testing Laboratories, Inc. as a condition of their listing of this product. They contain important safety information, and we strongly encourage you to read and apply them. When installing and using this electrical equipment, basic safety precautions should always be followed, including the following: IMPORTANT SAFETY INSTRUCTIONS 1.
Meijer.com -47. DANGER - Risk of Injury. The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the need arise to replace the suction fittings or the pump, be sure the flow rates are compatible. NEVER operate the spa if suction fittings are broken or missing. Never replace a suction fitting with one rated less than the flow rate marked on the original suction fitting. 8. DANGER - RISK OF ELECTRICAL SHOCK. Install at least 5 feet from all metal surfaces.
Meijer.com -5- F. Obese persons and persons with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa or hot tub. G. Persons using medication should consult a physician before using a spa since some medications may induce drowsiness while other medication may affect heart rat, blood pressure, and circulation. H.
Meijer.com -610. Never add water to chemicals. Always add chemicals to water to avoid strong fumes or violent reactions that may result in hazardous chemical spray. SAVE THESE INSTRUCTIONS. INSTALLATION INSTRUCTIONS SITE PREPARATION A. Structure: Your spa should always be installed on a structurally sound, relatively smooth and level surface. B. Electrical: The installation should be a grounded 120 volt outlet within 8 feet of the spa and allow for easy access to the cord mounted GFCI for periodic testing.
Meijer.com -7- Your spa may be installed on any level, smooth surface that is strong enough to support the filled unit. Observe the following considerations when deciding where to place your spa: 1. Make sure there are no sharp objects under the spa. x 8 ft square platform, 5 to 9 inches in height, will provide a sufficient area for installation. 3. Verify that there is adequate room to place the spa and permit safe access. 4.
Meijer.com -8- SPA ASSEMBLY *Please note if fitting your spa with colored skin you must first inflate spa 50% and then place skin over wall edge. 1. Take all parts out of box. Compare package contents with contents diagram found on previous page. 7. Using adapter shown, inflate spa vessel (4). 2. Unfold spa vessel (4), inflation connection cover (7), and inflatable inner cover (5). 3. Remove label(s) from liner-topower pack union nut.
Meijer.com -9- FILLING THE SPA Please note: If your spa is equipped with water booster seats attach them now and fill with water and burp air out before proceeding. 1. Ensure that the power pack is not plugged in. 2. Remove the protective caps from the suction and discharge fittings inside the spa. Place the caps in a safe location. Be careful not to over fill the spa, or the spa may overflow during use.
Meijer.com - 10 5. Plug the power pack into the electrical outlet. The water pump will turn on and begin pumping water. Water should flow from the small return nozzle on the bottom inside wall of the spa behind the power pack. If water is not flowing from the return nozzle, repeat the air bleeding instructions provided in step 4. Unplug the power pack while bleeding air. NOTE: If the air is not properly bled from the filter tank, the water pump will be air bound and no water will flow.
Meijer.com - 11 - OPERATION • Test the GFCI before each use. (Refer to the instructions provided in the Maintenance section of this manual.) • Plug into a properly grounded receptacle. • Do not use extension cords. Temperature Control 1. During normal operation, the control display on the top of the power pack displays the current water temperature. 2. To set the desired water temperature, press and release the up or down heat button. The display will flash the desired water temperature set point.
Meijer.com - 12 techniques. Pieces of material can be obtained through your dealer. MAINTENANCE Vinyl Care – Interior Vinyl Repair 1. Empty the spa and refill with clean water every 3 months or when it becomes cloudy and proper water chemistry does not clear it up. 2. While empty, use a mild soap solution to wipe away any soil or stains on the inner liner. Rinse thoroughly before refilling the tub.
Meijer.com - 13 bromine feeder from the spa until sanitizer level drops to the correct level (2-3 ppm). siphon out the water. Do not lift the spa if it contains more than 1/4 inch of water. Chemical Additions 1. Always have the water circulating when adding chemicals. Add only one chemical at a time. 2. Completely pre-dissolve any granulated chemicals in a water filled bucket so no granules rest on the vinyl surface. Never allow bromine tablets to rest on vinyl floor surface. 3. Add chemicals.
Meijer.com - 14 and drain to a suitable place. Important! 5. Lift the filter out of the filter housing. Clean the filter with the spray from a high pressure garden hose. Cleaning the Filter 1. Unplug the power pack from the electrical outlet. 2. Using the three caps provided, cap the suction and discharge fittings on the inside of the spa. 6. Place the filter back in the filter housing. Make sure the filter is properly seated in the housing and that the o-ring is properly seated in the o-ring groove. 3.
Meijer.com - 15 - 9. Open the air bleed fitting on the top of the filter housing. Leave the bleed fitting open for one minute, or until water drips from the bleed fitting. Close the bleed fitting. 10. Plug the power pack into the electrical outlet. 11. Finally, reset the desired temperature set point. 1. Turn on the turbo wave blower. GFCI (120 volt units only) The GFCI, or Ground Fault Circuit Interrupt, fitting on the power pack electrical cord should be tested monthly.
Meijer.com - 16 - SERVICE AND TROUBLESHOOTING Your spa was designed to minimize service requirements. If you encounter problems with your spa carefully go through the following steps. Air Pump Blower 1. Turbo wave pump will not turn on: A. Make sure the power pack is plugged into the electrical outlet, and that there is power to the outlet. Plug another electrical item into the outlet such as a hair dryer or lamp. If you do not have power, check the breakers at the main electrical panel. B.
Meijer.com - 17 supplied in the Maintenance section. If the GFCI is working properly and the power pack does not function, then the power pack is bad. If the GFCI is not working properly, do not use the spa. Immediately contact the manufacturer for instructions. 4. In some situations, the numerical temperature display may read ‘OH’ (overheat) and the spa will not heat until reset. To fix this problem, please use the following procedure: A.
Meijer.com - 18 - SPECIFICATIONS MODEL DS1oval110v AiriSpa Capacity : Seating: 2 adults Water: 190 gallons Height : 28 inches with cover Length: 74” Width: 45” Number of Jets : 1 return jet Over 120 air jets Power Pack : 1 HP turbo blower Fractional HP circulating pump Single phase (120 VAC, 60 Hz, 12 Amps) (240 VAC, 50 Hz, 6 Amps) 1000 Watt heater Weight : Dry: Spa – approx. 77lbs With water: approx. 1700 lbs.
Meijer.com - 19 - AiriSpa Warranty – Coverage Obligations of Purchaser Comfort Line Products Inc. obligation for the above listed products is limited to the term set below. This warranty extends to the original purchaser only. The warranty period commences on the original purchase date through 12 months. This warranty is not transferable to subsequent purchasers. This warranty is subject to the obligations, limitations, and exclusions listed below: Comfort Line Products Inc.
Meijer.com - 20 water level, use of an extension cord, improper chemical maintenance, burying the spa below ground level, damage from ice or freezing, low voltage or excess voltage, if applicable – over inflation, prolonged exposure to direct sunshine or UV damage, defacing or removal of serial numbers. This warranty gives you specific legal rights that vary from state to state. Specifications subject to change without notice.
