System information

ManualsBrandsComfort ManualsHeat PumpPRL-series

RECORD OF THERMOSTAT OPTIONS SELECTED

OVERVIEWQUICK STARTUSAGE GUIDESETUPPROGRAMMINGDIAGNOSTICS

MANUAL 37-6940A

0830

For your quick reference, below are the options selected by your installing dealer

to optimize your equipment settings and your personal home comfort preferences.

(Contractor to fill in value or check box. N/A = Not Applicable for your equipment or application.)

Factory

Thermostat Options Configuration Menu Setting

On-Demand Dehumidification: Set RH ________% (Relative Humidity) OFF

Continuous Fan Speed: High Medium Low (Fan-On Setting) Medium

Program Days Per Week: 7 Program Days



0/Non-Programmable 7

Continuous Backlight: On Off On

Energy Management Recovery: On Off On

Temperature Offset: _____ (0, 1, 2, 3, 4, 5°) Hi (+) Lo (-) 0°

Temperature Display: °F °C (Fahrenheit/Celsius) °F

Beeper: On Off (Touch Key Input Confirmation) On

Air Filter Maintenance: _____ Hours (System Runtime) Off

UV Lamp Maintenance: _____ Days Off

Humidifier Pad Maintenance: _____ Hours (Continuous Clock) Off

If you need help adjusting the programmed time or temperatures

in your thermostat, please call Homeowner Help Line at 800-284-2925

For All Other Service, Please Call:

Rheem Installing Dealer: ______________________________________________

Phone: ______________________________________________

Date Installed: ______________________________________________

Summary of content (10 pages)

PAGE 1
For your quick reference, below are the options selected by your installing dealer to optimize your equipment settings and your personal home comfort preferences.
PAGE 2
WORD TO HOMEOWNER You are now in command of the most sophisticated and easy to use home comfort system available today. Your Rheem Comfort Control2 System™ with Serial Communicating Technology will provide you and your family improved comfort, optimal energy efficiency, and enhanced reliability and performance.
PAGE 3
Enter the Heating Program 1. Touch the Menu key to display additional key choices. SETUP PROGRAMMING 2. Touch the Set Schedule key. The top of the display will show the day being programmed. The time and Set At temperature are also displayed. “MORNING” will also be displayed to indicate the period. 3. Touch SYSTEM key to select Heat in the SYSTEM switch area indicating the active mode being programmed. You can change to the other mode by touching the SYSTEM key at any time. QUICK START GUIDE . . . . .
PAGE 4
Temperature UP/Down Touch Key used for modifying setpoint as well as to navigate the menus System Touch Key To Select operating mode Worksheet for Re-Programming 7 Day Program Heating Program Fan Touch Key to select fan mode Fill in the blank worksheet provided below with your desired times, temperatures and fan operation: MON Wake Up (Morning) FAN Leave For Work (Day) FAN Return Home (Evening) FAN Go To Bed (Night) FAN 6:00 AM 70°F Auto 8:00 AM 62°F Auto 5:00 PM 70°F Auto 10:00 PM 62°F Auto
PAGE 5
USAGE GUIDE When programming your thermostat, you may copy the program from one day to another day or to all six other days. The Heating and Cooling Worksheet on page 17 allows you to pencil in your own program times and temperatures. Factory settings are listed on Monday (for Monday thru Friday), Saturday and Sunday. To copy a program from one day to all other days: If you are re-programming all 7 days, fill in all lines with the times and temperatures you want.
PAGE 6
SETUP Armchair Programming PROGRAMMING The thermostat uses 24 Volt AC power supplied by the system for normal operation. However, with “AA” batteries installed, the thermostat can be removed from the wall for convenient programming. Set thermostat SYSTEM touch key to Off before removing. System Power Loss 2 "AA" Batteries Based on this setting, the scrolling message area will show “CHANGE UV LAMP” to indicate maintenance is required. • Select humidifier pad maintenance reminder.
PAGE 7
• Select beeper (audio prompt) Default is On for the beeper to indicate a touch key selection. It can be changed to OFF. SETUP • PROGRAMMING 14 Select air filter maintenance reminder. Scrolling message will show “AIR FILTER MAINTENANCE”. Default is OFF. It can be changed to a setting from 25 to 1975 hours in increments of 25 hours to select the amount of time for the reminder. Consult your contractors for the hours and type of filter. Setting of 225 hours is typically 3 months of run time.
PAGE 8
Heat: Thermostat controls only the heating system. USAGE GUIDE Auto: Auto Changeover is used where both heating and cooling may be required during the same day. Auto allows the thermostat to automatically select heating or cooling depending on the indoor temperature and the selected heat and cool temperatures. This thermostat will not allow you to program a conflict between Heating and Cooling setpoints. • Em: Thermostat controls emergency heating only.
PAGE 9
USAGE GUIDE Select On Demand Dehumidification setting. Default is OFF. It can be set in the range of 40 to 94%. Ideally, the indoor humidity should be set at 55%. SETUP PROGRAMMING 12 When On Demand Dehumidification is selected, the thermostat will indicate the current humidity on the home screen. The display will show RH with the humidity %. If the current humidity is above the selected setting, the thermostat will send an On Demand Dehumidification request.
PAGE 10
Example: If you turn up the heat during the Morning program and touch the Hold key, it will remain at the new temperature until you touch Run Schedule or you manually adjust to another temperature. SETUP Choose the FAN Setting (Auto or On) PROGRAMMING FAN Auto is the most commonly selected setting and runs the fan automatically when the heating or cooling system is on.