LINKFLEX-AD1 LinkFlex XLR Interface Preamp Audio Adapter (For Camera&Phone) User Manual
Foreword Thanks for purchasing Comica LinkFlex XLR Interface Preamp Audio Adapter (For Camera&Phone). This product can help to transfer XLR microphone to smartphone or camera for audio recording. It is designed with functions of supporting adjustable sensitivity, smartphone and camera switch, real-time monitoring, etc. which can bring you better experience and sound quality effect. Please carefully read this instruction manual before use.
Main Functions . Strong shielding and anti-noise mic . LED work indicator light . Working condition indicator . For both camera and smartphone . Stepless adjustable sensitivity .
Components Microphone 1 2 3 4 5 6 7 8 3.
Installation and Use Before use Insert the XLR Microphone into the XLR input interface a. The product supports all XLR dynamic and positive condenser mic, 4 and not support passive condenser mic which need external phantom power. b. The product is compatible with IOS and Andriod systems. When used with Iphone 7 and other new version Iphones with Lightning jack,the original audio cable adapter (3.5mm-Lightning) is needed. c.
1.Used with camera 1.
1.2 Insert the 3.5mm output connector into the 3.
2. Used with smartphone 2.
2.2 Insert the 3.5mm output connector into the 3.
Function Description 1.Gain Control Wheel During the usage, the Gain Control Wheel adjust the output sensitivity of microphone Adjustable sensitivity drive plate 2. Monitoring jack You can monitor the recording situation through the 3.5mm monitoring jack 3. On and off function instruction When the power of the battery is low, the indicator light turns red, and the battery should be replaced. When not in use, please move the switch to OFF, turn off the machine.
Specification Output 10 3 pin XLR interface Input 3.5mm connector Gain Range Maximum increase -10dB Frequency Range 20Hz - 20kHz ±1dB Distortion + Noise <0.02%, RL=2kΩ, f=20~20KHz, Vo=0.
