4-group Multi-functional Mini UHF Wireless Microphone User Manual
Foreword Thanks for purchasing COMICA BoomX-U QUA Wireless Microphone To ensure bring you a good using experience, please read this manual book carefully before using and correctly install and operate Main Features . 4-group UHF Wireless Microphone, Broadcast Level . 24 Channels, Support Multi-receiver Monitoring & Shooting . 180°Foldable Antenna, 120m Super-long Transmission Distance . Support 4 Audio Tracks Mixing and Individual Output .
Packing List Main Parts: Transmitter (TX) 2 Receiver (RX)
Accessories: ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ 3.5mm Mic Audio Input Cable Wind Muff 3.5mm TRS-XLR Audio Cable 3.5mm TRS-TRS Audio Cable 3.
Components and Instruction Transmitter(TX): ⑤ 1. Power/Low Cut Filter Button ⑥ ⑦ 2. Muting Button 3. Power/Low Cut Filter Indicator Light 4. Audio Status Indicator Light 5. External Mic Locking Buckle 6. 3.5mm TRS Port of External Mic 7. Internal Mic ① ⑧ ⑪ ② 8. IR Sensor 9. USB-C Charging Port ③ 10. Reset Hole ④ 11. Belt Clip 12.
⑧⑨ Receiver(RX)： ⑩ ⑪ ① 1. Group B Antenna 2. Group A/B/C/D Working Status Indicator 3. Display Screen ⑫ ② ③ 4. Menu Function Button+ 5. Function Setting Button 6. Power/Menu Back Button 7. Menu Function Button8. IR Sensor ④ ⑤ ⑥ ⑦ 9. 3.5mm TRS/TRRS Monitoring Port 10. 3.5mm TRS Audio Output Port(Group C/D&MIX Output Mode) 11. 3.5mm TRS Audio Output Port(Group A/B&MIX Output Mode) 12. Group A Antenna ⑮ 13. Belt Clip 14. USB-C Charging Port 15.
Screen Display and Function Introduction Transmitter (TX) Function Introduction: 1. Power/Low Cut Filter Button Long press for On/Off; Short press for Low Cut Filter 2. Muting Button Long press to switch between normal recording and mute 3. Power /Low Cut Filter Indicator Light The blue light stays on when it is turned on; The purple light keeps on when in Low Cut Filter mode; The red light flashes during pairing or low battery and keeps on when charging 4.
6. Internal Mic Point the built-in microphone at the sound source to record 7. 3.5mm TRS Port of External Mic Insert 3.5mm TRS microphone input cable and use the external lavalier microphone to record. At this time, the internal microphone of the device is turned off 8. IR Sensor It's paired successfully only when the transmitter and receiver's IR sensor are closely aligned 9.
Receiver (RX) Screen Display: None Non-mixing Mode (Four independent audio tracks output) ALL Mixing Mode (Four groups mixed into one audio track output) Signal Strength Group Channel MIX ALL +12 B A CH 12 CH 8 C CH 5 8 +12 D CH 12 Transmitter Battery Status Receiver Battery Status +12 Volume Audio Dynamic Bar +12
Function Introduction: 1. Power/Menu Back Button Long press for On/Off; Short press to back to the previous menu 2. Function Setting Button Short press to enter the menu/confirm setting 3. Menu Function Button+/Adjust the upper and lower menus 4. Group A/B/C/D Working Status Indicator The blue light keeps on when the corresponding group is successfully paired 5.
6. 3.5mm TRS Audio Output Port In the mixing mode, both ports can output one audio track mixed by four groups In the non-mixing mode, A/B output port outputs two independent audio tracks (A and B), C/D output port outputs two independent audio tracks (C and D) 7. 3.5mm TRS/TRRS Monitoring Port Plug in 3.5mm TRS/TRRS headphones to monitor; When monitoring in non-mixing mode, A/C is the left channel and B/D is the right channel 8.
Installation and Usage Pairing Method: Choose manual/automatic pairing according to personal needs A. Manual Pairing Enter "Channel", select the corresponding channel according to personal needs; Enter “Sync”, keep the IR sensor of the transmitter and receiver closely aligned, and then synchronize one by one to successfully pair Menu Menu Menu Menu Channel Auto Scan Sync Channel A 23 Channel B 21 Channel C 08 Channel D 05 Sync Sync A Sync B Sync C Sync D Yes No No No B.
Installation Method： Transmitter (TX) Choose internal/external mic according to personal needs External Mic Internal Mic 1.For better concealment during use, it is recommended that the belt clip is fixed on the outside for use 2.When the external microphone is working, the internal microphone will be automatically turned off 3.
Receiver (RX) A. Mixing Output 1. Work with Camera/Camcorder/Recorder Connect the receiver with camera/camcorder/recorder through the 3.5mm TRS-TRS/3.
2. Work with Smartphone/Computer Connect the receiver with smartphone/computer through the 3.
B. Non-mixing Output 1.
2. Four-group Output: work with recorder Connect the receiver with recorder through the 3.5mm TRS-TRS/3.
Specifications Receiver(RX) Transmitter(TX) Antenna PCB Antenna Antenna PCB Antenna Polar Pattern Omnidirectional Receiving Sensitivity -90dBm Frequency Response 80Hz ~ 20kHz Signal/Noise 75dB Sound Pressure Level 100dB Equivalent Noise 19dBA Signal/Noise 75dB Sound Delay <20ms Equivalent Noise 19dBA External Mic Input Interface 3.5mm TRS × 2 Sound Delay <20ms Monitor Interface 3.5mm TRS/TRRS External Mic Input Interface 3.5mm TRS Battery Li-ion Battery 1400mAh 3.
Parameters Transmitter(TX) Channel Number 24 x 4 Carrier Frequency of Group A 568.125MHz~573.875MHz Carrier Frequency of Group B 580.125MHz~585.875MHz Carrier Frequency of Group C 574.125MHz~579.875MHz Carrier Frequency of Group D 586.125MHz~591.875MHz Transmitting Power 15dBm Receiver(RX) 18 Channel Number 24 x 4 Carrier Frequency of Group A 568.125MHz~573.875MHz Carrier Frequency of Group B 580.125MHz~585.875MHz Carrier Frequency of Group C 574.125MHz~579.
