User Manual

六，
Components Introduction
 Microphone
Microphone Interference Tube
Shock Mount
Locking Screw
Cold-shoe Bracket
1/4 Screw Hole
Smartphone/Camera switch
3.5mm Audio Output Line
七，
Installation and Operation
1. Use with Camera
Attach the microphone cold shoe bracket to the camera, fasten the Locking
Screw.
Connect the microphone’s 3.5mm audio output line and Camera.
Set the smartphone/camera switch to the left camera mark.
2. Use with Smartphone
Mount microphone cold shoe bracket to accessories with cold shoe interface
(recommended VF-H1 ),fasten the Locking Screw..
Connect the microphone’s 3.5mm audio output line and smartphone.
Set the smartphone/camera switch to the right smartphone mark.
八，
Tech Parameters
Polar Pattern
Super Cardioid
Frequency Range
40Hz～20KHz
Output Impedance
2.2kΩ
Max.SPL
>100dB
Sensitivity
-34dB±3dB
Signal to Noise Ratio
>68dB
Weight
52g
Dimension
160*50.8*86mm