System information

41
Chapter 7: Integrating Polycom RMX
Systems with Siemens OpenScape
This chapter shows you how to configure Polycom® RMX® 1500/2000/4000 systems and integrate the
system with Siemens OpenScape® products. For more detailed information about configuring a Polycom
RMX system, refer to the Polycom RMX documentation on the
Polycom Support site.
Defining IP Network Services
To enable the Polycom RMX system to function within the IP network environment, you need to define
the network parameters for the IP Network Services. You can access the configuration dialog for the
network services through the RMX Management pane of the RMX Web Client.
The Polycom RMX system uses two IP network services:
• Management Network
• Network Service (Conferencing Service)
Both are shown in the following figure.