System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
70
The Ethernet Settings dialog displays.
Note: The RTM LAN port on the RMX 1500/4000 is Port 2.
Although the RTM LAN (media card) port on the RMX 1500/4000 is shown as Port 1 in the
Ethernet Settings and Hardware Monitor fields, the physical LAN connection is Port 2.
2 Modify the following fields:
○ Port Type Indicates the LAN port type.
○ Speed Select the speed and transmit/receive mode for each port. Note that the default speed
is Auto. When set to Auto, negotiation of speed and transmit and receive mode starts at 1000
Mbps Full Duplex and proceeds downward to 10 Mbps Half Duplex.
Note: Do Not Change Ports 1, 4, and 5 of the Management 2 and Signaling 2 Networks
Do not change the automatic setting of Port 1,4 and Port 5 of the Management 2 and Signaling 2
Networks. Any change to the speed of these ports will not be applied.