Specifications

USB Connection Phone to Headset
18
To connect your Nortel phone and Jabra head-
set, just follow these simple steps:
SETTING UP THE JABRA HEADSET
1. Set Compatibility selector on headset base
to position “A” with DHSG on headset.
2. Connect via USB port of phone.
SETTING UP THE NORTEL PHONE
1. In the “Preferences” menu, choose
“Headsets …”.
2. Press the “Apply” button.
3. In “Active Headset Device” select the
appropriate headset type from a list of
Wired, USB, or Bluetooth headsets.
Selection of a particular headset type fine
tunes the audio to that particular headsets
type. Selecting the right headset type is there-
fore recommended to achieve best perfor-
mance.
SETTING UP THE NORTEL IP PHONE USING
JABRA LINK™ 14201-32
1. In the “Preferences” menu, choose
“Headsets …”
2. Press the “Apply” button.
3. In “Active Headset Device” select the
appropriate headset type from a list of
USB headsets.
For more information and disclaimer, visit www.jabra.com/nortel
UNIStim firmware release 5.2 for IP Phones is available for download from the “Software Download” link under
“Support and Training” on the Nortel website located at: http://support.nortel.com. The firmware is available
by phone model under “Phones, Clients and Accessories”. These firmware loads have not been introduced as
the default loads for the IP Phones shipped from Nortel, and must be installed by your system administrator.
ELECTRONIC HOOK SWITCH (EHS) SOLUTIONS FOR NORTEL
SET UP INFORMATION