Specifications
31
JABRA PRO™ 9400 SERIES AND JABRA GO™ 6470 EHS SET UP
A SmartSetup wizard on the touch screen
guides you through the simple process of
connecting phones and setting up EHS
functionality.
Once you are up and running, the screen’s
colourful icons and intuitive menu system
make remote call-handling a breeze.
Jabra PRO 9400 and Jabra GO 6470 Series
support EHS with following phone system
manufacturers: Aastra, Alcatel-Lucent,
Avaya, Cisco, Polycom, Shoretel, Siemens
and Toshiba.
Setting up Jabra PRO™ 9450
1. Connect the Jabra LINK™ adapter as
shown in adapter documentation sup-
plied with the Jabra LINK™. On some
phones the telephone cable will also
need to be connected.
2. Call your connected desk phone using
another phone to enable the Jabra
LINK™ adapter. Wait 10 seconds before
answering the phone.
3. Set a clear dial tone. Remove the front
panel of the Jabra PRO 9450 base, as
illustrated. Put on the headset.
4. The desk phone icon will change to
.
If the icon does not change, tap the
desk phone button on the base keypad.
JABRA PRO 9400 SERIES AND JABRA GO 6470 HEADSETS FEATURE A
UNIQUE SCREEN-BASED SET UP SERVICE
FIRST CHOOSE THE REMOTE SOLUTION (EHS OR JABRA GN1000)
Press Yes to connect
to desk phone
Press Yes Choose Electronic
Hook Switch adapter
Determine cable type Choose EHS mode
NOW CONNECT YOUR HEADSET TO YOUR PHONE
Unplug handset cable Connect handset
to base
Connect to base Connect desk phone Connect to base Connect adapter to
desk phone
MANUFACTUROR
AASTRA
ALCATEL-
LUCENT
AVAYA CISCO MITEL NEC POLYCOM SHORETEL SNOM SIEMENS TOSHIBA YEALINK
EHS MODE DHSG
DHSG
MSH
1
DHSG
DHSG
Cisco
Blue-
tooth
IQ DHSG RHL DHSG DHSG RHL DHSG
The example above illustrates configuration of a Cisco-solution.
The specific configuration may vary from manufacturer to manufacturer.
1
MSH for non-EE(Extended Edition) models, used with Jabra LINK™ 14201-09
DHSG for EE models, used with Jabra LINK™ 14201-20
For more information visit www.jabra.com
5. Lift the desk phone handset and set
aside, or press the headset button on
the desk phone.
6. Rotate the clear dial tone switch from
“A” to “G”, as illustrated, and listen in
the headset for a clear dial tone. (this
setting “A” on most phones “B” on
Cisco, “A” or “G” on Toshiba).
7. Set the microphone volume. Remove
the front panel of the Jabra PRO 9450
base, as illustrated.
8. Make a call to test your speaking
volume. The listener should not adjust
their own volume. You may adjust your
microphone speaking volume on the
base, as illustrated. When finished, end
the call and return the front panel of
the Jabra PRO 9450.