User guide

User Guide SoundPoint IP 650
4 - 10
return to speaking with party A. You end your call with party A and recording
stops. Your conversations with parties A, B, and C are all recorded in the same
.wav file as follows:
If there is insufficient free space on the USB device when you press the Start
soft key, recording does not start and the message “USB device is full.
Recording cancelled.” appears. If the USB device becomes full during
recording, recording stops and the message “USB device is full. Recording
stopped.” appears. If you remove the USB device during recording, recording
stops and the message “USB device removed unsafely. Recording cancelled.”
appears. If you attach an unsupported USB device, the message “Unsupported
USB device attached: <product string>, <vendor ID, <product ID>” appears.
This section includes information on:
Recording Calls
Recording Conferences
Pausing and Resuming Recording
Polycom recommends that you do not remove the USB device while recording. The
file being recorded at that time will be incomplete and cannot be played back later.
There is a small probability that the USB device itself may be damaged by this
action.
Note
If you plug in your USB device into your SoundPoint IP 650 and the message
“Unsupported USB device attached...” appears, contact your system administrator
about which USB devices are supported.
Note
You may be required by federal, state, and/or local laws to notify some or all called
parties when you are recording. For more information, contact your system
administrator.