User manual

10 of 38
4.2 FTP Setup
n Local FTP Server: Turn on/ off the ProPLAY HD server.
(If you use the ProPLAY HD server, please disable the DHCP function and input a
fixed IP address, Mask, Gateway and DNS of the ProPLAY HD)
n Local FTP Server Setup: Set the “Port”, “User ID” and “Password” of the ProPLAY HD
(The Default Port: 21, User ID: root, Password: admin)
n FTP Auto Download: Enable/ Disable the FTP auto download function.
n Remote FTP Download Setup
- Server IP: Enter the domain name or IP address of the FTP as was given to you by
your Web hosting provider.
- Port: The default port for FTP is 21. In most cases you should not change this
number. If the FTP site uses a port other than 21, you should enter the correct port.
- User ID: Enter the user name of the Remote FTP server.
- Password: Enter the Password of the Remote FTP server.
- FTP Path: Enter the folder path that you want to share.
n NTP Server: Enable/ Disable the NTP server function. (if the ProPLAY HD isn’t
connect to internet, please disable the NTP Server function)
n Time Setup: Set the NTP Server, Local Time and Auto Download Time here.
NTP Server (the ProPLAY HD must be already connected to the network)
- NTP Server: Enter the NTP server IP address like: 204.152.184.72.
- G.M.T: After get the time from NTP server, it will update the G.M.T field.
- Time Zone: Use the Volume +, - and Numeric Key to set the time zone of
your location. (time zone must be set properly for the Auto-Download and
Schedule functions)
NOTE: GMT and applied regions