User's Manual

the current position when you are ready to reattach the trailer to the tow vehicle.
6) Level your towable vehicle from front-to-back
Once your vehicle is level from side-to-side you are ready to begin leveling from
front-to-back. For this step you will be using the bottom section of the Leveling
screen. Similar to the side-to-side leveling step, when the vehicle is not in a level
position there will be a yellow arrow pointing up or down near the front of the
trailer graphic side view as shown in figure 10. This indicates whether the front of
the vehicle needs to be lowered (arrow pointing down) or raised (arrow pointing
up) to achieve a level position from front-to-back. If the vehicle you are leveling
is a trailer, simple raise or lower the tongue of the trailer as indicated by the up or
down arrow in the bottom section of the Leveling screen. Level position for the
front-to-back will be indicated in the same manner as the side-to-side leveling
process. The level indicator will be green and the displayed measurement
distance will be ‘0’.
7) Recall your hitch position (towable vehicles only)
If the vehicle you are leveling is a trailer, you can recall the hitch position you
saved in step 5 to aid in returning your tongue to the position it was in when you
removed it from the tow vehicle hitch. Tap on the Recall Hitch position button at
the lower right of the Leveling screen. The Recall Hitch Position screen will be
displayed (figure 11). The Recall Hitch Position screen shows a side view of the
trailer, a yellow arrow pointing up or down, and a position indicator similar to the
level indicators on the Leveling screen. A measurement distance is also
displayed which represents the amount of distance the tongue needs to be
moved up or down (as indicated by the yellow arrow) to return to the previously
saved hitch position. Moving the trailer tongue in the direction indicated by the
yellow arrow will cause the displayed measurement distance to be reduced. The
tongue will be at the saved hitch position when the displayed distance
measurement is ‘0’ and the position indicator is green. A Hitch Position Save
Date is also displayed at the bottom of the Recall Hitch Position screen. This
indicates when the currently saved hitch position was recorded.
8) The driveable Leveling screen
The driveable Leveling screen (figure 12) shows the top view of a driveable
vehicle. Also displayed are indications for driver side, passenger side, front and