Installation guide

Appendix A
Setup Error Messages
The following table provides a listing of the most common error messages
displayed during setup.
Table 4: Setup Error Messages
TestLevelSecPriMessage
Check that the file adheres to
the correct formatting and
Critical
Stop
YesNo
10 – ‘The pre install
check data file does
structure for use in analysis
on the secondary.
not have the correct
format. Setup cannot
continue’.
Check that the analyzer and
collector dlls are compatible.
Critical
Stop
YesNo
Setup has detected
incompatible versions
of the collector
version $x and the
analyzer version $y
dll. This would suggest
different versions of
Setup have been run on
the Primary and
Secondary servers.
Check file format is correct.Critical
Stop
Yes–
File $x cannot be
analyzed it may be
corrupt Setup is unable
to continue. If the
file has been opened
check that it has not
been saved with Word
Wrap.
Test whether the server is a
domain controller.
Critical
Stop
YesYes
190 – This server is a
#1# domain controller.
SolarWinds Failover
Engine must not be
installed on a domain
controller.
Test for /3GB on Windows
2000
Critical
Stop
YesYes
173 – SolarWinds
Failover Engine does
not support the '/3GB'
Setup Error Messages - 35
SolarWinds Failover Engine - Installation Guide