.in.ua www.commax.in.
Warnings and caution 2 CAV-72B Part Name & Function 4 Features and Main Functions 5 CDT-180 Part Name & Function 6 Package contents 7 System Layout 8 Wiring Diagram 9 Installation Method 11 Operating Description 12 1. Door Answering & Monitoring 12 2. Interphone 13 3. Connecting the Main Unit and the DECT Phone 14 Menu/ Set 14 1. Burglar function 14 2. ROOM ID setting 15 3. Interphone Pause 15 3. Screen Adjustment 16 4. DECT Phone Registration 17 (REC.
Make sure to follow the instructions to prevent any danger or property losses. It indicates prohibition. Warning 2 It indicates prohibition of disassembly. Death or serious injury is expected. It indicates prohibition of contact. It indicates prohibition. Caution It indicates prohibition of disassembly. An injury or property losses are expected It indicates prohibition of contact. It indicates dos and don’ts. It indicates dos and don’ts.
1. Features 7” Wide TFT-LCD function Surface type Free voltage power source OSD (On screen Display) 2. Main function Door Answering & Monitoring Interphone call Image storing 128 cuts : Auto & Manual record Door Open function CCTV Camera connectable 4 Door camera units (Inter-connectable with door cameras or CCTV cameras) & 1 interphone connectable Security function (Burglar 4 zones) No. Name Indicate that DECT phone is under usage.
Receiver LED -Receiving incoming call -Receiving new message message -Flash at new message Color LCD Function display Redial / Back / Clear User manual Monitor & Handset Wall Bracket Up/Down Key -Menu Up/Down -Setting change Menu button Menu/ OK/ Option Left/Right Key -Cursor movement -Right : Open redialing list Down : Hot key for Phone book Function Key Menu / OK / Option Function Key Redial / Back / Clear Headset Outlet TALK Key -Making a call -Handsfree -Speaker On Phone END Key -End Call -
images images Mast Main Unit Connectable Products. Camera : Max. 4EA Main distributor : 1EA Master Unit: Max. 20 EA (Can connect up to 5 units per port in the main distributor) Dect Phone : Max. 4 EA Wiring Main distributor To door Camera : 50M(at 0.65mm) Main distributor To Monitor : 20M (at 0.5mm) Main distributor to CCTV Camera : Coaxial Cable CAUTION -The monitor can connect up to 5 EA per port from the main distributor. -Be careful of the polarity. -It is recommended to use UTP(CAT.
Wiring between CCTV Camera to Main Distributor -All ports for the camera on the main distributor are available for using the CCTV or Door Camera units. -Power source is separately required per CCTV Camera -The type of Coaxial Cable depends on the distance of installation. Installation method of monitor To. CDS-4CM : GND : VIDEO CAUTION -Avoid installing this product where there is magnetic force, humidity, direct exposure under the sun and near heating apparatus.
1) Door Answering & Monitoring 2) Interphone This function is to call to other room unit and talk with other room unit. When you push the CALL button on camera, you can hear the chime sound from the monitor and visitor s image will be shown on a screen OSD : [Cam1 call] * Duration of on-screen: 30 Seconds If you push the INTERPHONE button, each room ID will be shown in the form of [Room#] as below. To talk to visitor, push the TALK button and then you can talk in the hands-free mode.
3) Connecting the Main Unit and the DECT Phone This DECT phone has various functions from a normal DECT phone. Door Call When you receive a call from door, pick up the DECT Phone from the adaptor and press the TALK button and you can talk, To end the talk, put down the DECT Phone to the adaptor or push the PAUSE button. Door open When you are making a call with door, if you push the No.
4) Screen Adjustment 5) DECT Phone Registration Before usage of any wireless phone, each phone must be registered with the DECT base unit. Registering a Wireless Phone Registering... Base Men Redia Exit Menu >> Handset Set >> Register >> Base # ID >> Enter PIN (Personal Identification Number: 4-digits) then press the OK button. The phone will then be registered in the body of the DECT base. Next, program the registration mode from the body.
2) Time Set Press the REC./IMAGE button. [Image memory] Use the UP,DOWN keys to select the Time Set mode and press ENTER. Review Time Set Auto Record DEL Whole Memory : Select Menu ENT : Menu Det REC/ MAGE: Turn Off Press the REC.
If you think that the product has trouble, please first check below contents before you ask a repair. Troubles Check Point Actions The power supply is not on. All works are stopped 1. Please connect the 1.The power supply power supply cord code is missing or not. 2. Please turn on the power 2.The power supply switch supply switch (down) (down) is off or not. pushing to the right. A Call operation is not performed. 1. Please refer to connection 1.The wiring between other related page and manage.
a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com Printed In Korea/ 2007.